jm_middleton07
03-12-2014, 01:53 PM
First off just want to say hello. This is my first post on this forum. I recently purchased a 2002 ds50. It is in rough shape but it will give me a project to work on. I would like to set it up for a nice woods quad for my 6 year old. So if you have some performance parts, extended a arms etc. laying around let me know.
I cant get it to start. It might have hit a couple times but never started. Just cranks and cranks. When i test the spark plug it has spark but it is usually gas covered.
Below is what i have checked so far:
cleaned the carb
checked the compression (120psi) after 5 or so kicks ( it didnt leak off after 15 min or so)
checked for spark
removed spark arrestor
The wiring has been hacked up and i dont have a wiring diagram so that could be the issue but i do have spark. Im going to replace the spark plug and get new gasoline oil mix this evening to make sure it is not fuel related. The oil injector has been blocked off on this unit. It looks like the oil container has been removed and the line to the injector was blocked off. Not sure if this would cause a problem but i seen the unit running two months ago and it has only set since then or so i was told.
Im just stumped but im not a 2 stroke man either. Always messed with 4 stroke engines. I appreciate any help i can get.
I cant get it to start. It might have hit a couple times but never started. Just cranks and cranks. When i test the spark plug it has spark but it is usually gas covered.
Below is what i have checked so far:
cleaned the carb
checked the compression (120psi) after 5 or so kicks ( it didnt leak off after 15 min or so)
checked for spark
removed spark arrestor
The wiring has been hacked up and i dont have a wiring diagram so that could be the issue but i do have spark. Im going to replace the spark plug and get new gasoline oil mix this evening to make sure it is not fuel related. The oil injector has been blocked off on this unit. It looks like the oil container has been removed and the line to the injector was blocked off. Not sure if this would cause a problem but i seen the unit running two months ago and it has only set since then or so i was told.
Im just stumped but im not a 2 stroke man either. Always messed with 4 stroke engines. I appreciate any help i can get.