LxMxL97
02-21-2014, 06:56 AM
2005 400ex
Powermadd Hand guards
Tag Bars
Blingstar Bumper
Houser +2 A-Arms
Elka Shocks
Itp Baja t-9 wheels Front 4:1 Rear 3:2
Itp gncc Fronts tires 22x7x10 95% Tread
Journey Rear tires 20x11x9 90% Tread
Bigger aftermarket Oil Cooler
Maier hood Ill include the stock hood and headlight
Full cobra chassis skid plate and swingarm skid
New FMF exhaust stock header with the welds ground
New chain 2 rides
Lonestar dual roller carrier
Durablue locknut
White Frame
Nerf Bars (unsure of the brand)
Moose Case saver
K&N filter
Jetted
Has reverse
Bored to a 416- J&E piston 11:1
Stage 2 HotCam
New timing chain
New timing chain gear
New timing chain guides
New Clutches
New Clutch springs
New valve seals
New valve guides
Had the valves relapped
While the motor was apart the bottom end was checked for faults came back clean
Motor was fine when it was taken apart not blown up just did it for more power the motor has about 35hrs of ride time on it
EVERY Bearing was replaced about 15hrs of ride time they were replaced with pivot works works bearings that have a lifetime warranty currently needs carrier bearings I would fix it but it takes about a week to get the bearings in it will cost nothing to fix as they have a lifetime warranty located in st.clairsville ohio 43950 text 740-391-3236 for pics can't get them to upload
Powermadd Hand guards
Tag Bars
Blingstar Bumper
Houser +2 A-Arms
Elka Shocks
Itp Baja t-9 wheels Front 4:1 Rear 3:2
Itp gncc Fronts tires 22x7x10 95% Tread
Journey Rear tires 20x11x9 90% Tread
Bigger aftermarket Oil Cooler
Maier hood Ill include the stock hood and headlight
Full cobra chassis skid plate and swingarm skid
New FMF exhaust stock header with the welds ground
New chain 2 rides
Lonestar dual roller carrier
Durablue locknut
White Frame
Nerf Bars (unsure of the brand)
Moose Case saver
K&N filter
Jetted
Has reverse
Bored to a 416- J&E piston 11:1
Stage 2 HotCam
New timing chain
New timing chain gear
New timing chain guides
New Clutches
New Clutch springs
New valve seals
New valve guides
Had the valves relapped
While the motor was apart the bottom end was checked for faults came back clean
Motor was fine when it was taken apart not blown up just did it for more power the motor has about 35hrs of ride time on it
EVERY Bearing was replaced about 15hrs of ride time they were replaced with pivot works works bearings that have a lifetime warranty currently needs carrier bearings I would fix it but it takes about a week to get the bearings in it will cost nothing to fix as they have a lifetime warranty located in st.clairsville ohio 43950 text 740-391-3236 for pics can't get them to upload