Dream Quads

[Glow Plug]

ok i know this has been done alot in the past but i haven seen one for a while so i though why not


so what are everyones dream quads?


mine:
416ex with elka's all around full national level chassie components a-arms, swing arm etc 416 national kit, yellow plactic, hypers

crf 450 quad; with houser frame and a-arms, swingarm, rpm axle, hipers, white full bore, elkas


and that's about it :)

[fiffer]

mine is a z 400 motor in a 400 ex everything else that put tcs shocks all around with plus one a-arms and axle(not sure what kind. a gusseted frame and everything powerdcoatedblack w/yellow stock plastic. now for the motor preformance cam, kand n air filter and oil filter, no airbox lid, dmc alien complete exhaust, bored to a 440 with a je piston, black carbon fiber beadlocks with holeshot xct's all around, a pro design kill switch, dg front bumper, ac pro peg nerfs, ac grab bar, rentals,ims foot pegs and maybe some other goodies. im not about the fastest but id like this the most

[lex luger]

mines a project that i was about $200.00 away from doing...

taking an '85-'86 3wheeler frame(ofcourse of ebay[dont wanna ruin a good trike ;) ] ) and putting a cr500 motor in it...only needed a counter balance :confused2 or alotta ruber washers....

I WAS SOO CLOSE..:mad:

[250r/master3]

MY QUAD

[Glow Plug]

ok i have a few more to add :D


c'dale moto

another 400ex, with arenas frame, elka triple rates with ssd, lone star a-arms, lone star axle, lone star swing arm, white bro's e series full pipe, xr 400 cam, hipers all round with eather hole shot mx's or razrs, yellow race cut plactic with a black hood with scoop and that's all i can think of right now :)

[CHAUNCY]

I would have to say a 250r with all the fixins and a 330 big bore kit.

[QuAdRaCeR244]

i want that 1000cc quad on ATV Off-Road Fury:p

[CHAUNCY]

Originally posted by QuAdRaCeR244
i want that 1000cc quad on ATV Off-Road Fury:p

That thing would haul:eek:

[QuAdRaCeR244]

Originally posted by CHAUNCY
That thing would haul:eek:


yeah it would, i bet i would die or almost die on it:o

[CHAUNCY]

Originally posted by QuAdRaCeR244
yeah it would, i bet i would die or almost die on it:o

It would be a fun way to die:huh

[QuAdRaCeR244]

Originally posted by CHAUNCY
It would be a fun way to die:huh


lol, yeah it would be. it would be better than waiting till i'm really old and sick and die slowly:ermm:

[sweet300ex]

Axis/Roll CRF 450

[blondie69]

a modded out 250r or some guy on here has a really kool 300ex and i love it. i can post a pic (i had to save it:D )

[honda400exrider]

Mine would be a 400ex with Duncan Racing National 440 kit, LOBO II front and rear end, an aluminum frame, Fullbore orange plastics, race cut of course, Tag bars, Alotta crome and everything else powdercoated by only the best, CW himself:devil , Razrs on douglas shamrock beadlocks, and a bunch of other little goodies...:devil

[AlaskaSpeed]

I am lucky enough to own one of my dream quads.....:D

[AlaskaSpeed]

:D

[AlaskaSpeed]

:)

[250rmike]

alaska your lucky enough to own one of my dream quads lol. i have akways wanted a moto or a 426 bike.

[AlaskaSpeed]

Originally posted by 250rmike
alaska your lucky enough to own one of my dream quads lol. i have akways wanted a moto or a 426 bike.

LOL...and I have always wanted an R......thanks...........JIM

[nismo]

one of my dream quads is a stock 03 400ex or a ds650

[250rmike]

hey alaska u have my dream quad and i have urs wanna make a switch lol

I race/ride my dream quad....:D

[AtvMxRider]

Originally posted by AlaskaSpeed
I am lucky enough to own one of my dream quads.....:D

POS





















:blah J/P Jimbo :devil

[toby400ex]

I think i could settle with this baby

[Ryan]

Jim, your C-dale is sweet. I would die for that thing :huh .

[Honda4trax250x]

the new honda! if it ever comes out:rolleyes:

[CBW]

Oldie but a goodie:D :p

[CBW]

one more time................:devil

[roostin_dale]

mine with about $4,000+ more in it

Shocks, a-arms, Hi-pers, Cylinder bore, graphics/seat, number plates, chrome side cases, chrome frame, Lonestar swingarm...maybe more

[TIGER72]

A FRIEND OF MINE IS TALKING ABOUT SLIPPING A HONDA GOLDWING 1200 ENGINE INTO A 400 EX FRAME....THAT WOULD KICK ARSE.... :eek2:

[hessianmx111]

im gonna catch some crap for this but just a plain old 2003 red and black yamaha blaster with a toomey pipe and douglas rims:ermm:

[CHAUNCY]

Originally posted by hessianmx111
im gonna catch some crap for this but just a plain old 2003 red and black yamaha blaster with a toomey pipe and douglas rims:ermm:

The 2003's are nice because of the disk brakes, and toomey makes a nice pipe for the blasters also!

[250EXking]

mine would have to be a:....


440ex, yoshi system, elka all around, maxxis razrs, renthals, durablue axle, +2 a-arms,



you know the works.

[Knight440]

Originally posted by AlaskaSpeed
I am lucky enough to own one of my dream quads.....:D


Hey Jim great minds think alike
:cool:

[stocktires]

:eek2:

here's one of mine

[HoNdAdude48]

id like to take an lsr frame stick a crf450 motor in it and race that!:o

[racerx573]

Laeger framed R with Axis all the way around and CR500 linkage...:p ;)

All I need now is a powervalve...

[cheetah]

I would have to say any cdale. Cannibal, Speed, Glamis, Blaze, Moto, I don't care.

Of course if I had an option I would take a blaze with the mapping device, nerf bars, and elkas all around. But I do like that black and blue cannibal that pappy used to have. Who has it now, 4punks?

[Jellyrolls]

mine

[Glow Plug]

Originally posted by cheetah
But I do like that black and blue cannibal that pappy used to have. Who has it now, 4punks?

4punks has guy400's old c'dale which he traded for 4punks 400ex, i'm not sure who has pappys old cdale :confused:

[cheetah]

Originally posted by Glow Plug
4punks has guy400's old c'dale which he traded for 4punks 400ex, i'm not sure who has pappys old cdale :confused:

Oh ok I remember now. Didn't he trade it for that 250r then? PAPPY WHO HAS YOUR OLD CDALE!!! It looked sweet though.

[Glow Plug]

Originally posted by cheetah
Oh ok I remember now. Didn't he trade it for that 250r then? PAPPY WHO HAS YOUR OLD CDALE!!! It looked sweet though.

yeah he traded for someone's r and then traded that for this 400ex project thing :)

[AlaskaSpeed]

Originally posted by Knight400EX
Hey Jim great minds think alike
:cool:

LOL....Knight, I had to run into the garage and make sure you didn't steal mine......JIM

[Brad]

my dream quad is a 2001 400EX yellow(because comes with black seat which says "sportrax") with maier black plastic and blue camo shock covers that fit over elkas with piggybacked rezzies with an alluminum airbox, pingry oil tank, sparks 416 kit, did o ring x ring chain, lsr swingarm, roll design +2 +1 a arms, roll design steering stem, ac front bumpber, ac propeg nerfs, lonestar titanium frame, renthal sprockets, tag x-2 bars, roll design pegs, acerbis handguards, smith grips, ims fuel tank (standard), 9" HiPers with grooved tamers, +2 braided lines, sparks x-6 pipe, lsr dominator adj axle with hubs, dirtdigger barnette clutch, hinson clutch basket, edlebrock quiksilver carb, k and n filter, with outerwears, ez pull clutch lever and perch, lsr pb blockoff ac heavy duty skidplate, ac heavy duty engine skidplate, roll design shifter and brake lever, ac wide grab bar, hotcams stage 2, braking wave rotor, ofm air scoops, and works ultracross/frr with piggyback rezzie.

in a couple of years my quad will match this decription excactly... u jus watch

[CBW]

Originally posted by Jellyrolls
mine

Good lookin R there Jellyrolls.:cool:

[Chanman420q]

CRF 450 with all the goodies

but what is more likely for me

426 kit, FCR 39, Axis Long Travel, +3 arms, full bore, hyper wheels, tag bars, tag bumper, Hotcams 2, Port, RPM axle, K&K graphics kit, Sparks exaust, K&N, Cant really think of what else id need.. Kill switch? lol

[ex kid]

matt smileys team safari/pro parts 250r. roll frame, lrd 270 power vavle, axis shocks and sweet silver and red graphics.

and a blaze with the nerfs gone and red and blacl fullbore plastics with red ringed hi pers. hmf exhaust, some hertz stuff,prm grab bumpers etc...,and worked by lrd to a 465 stroker.

[Chef]

Originally posted by Glow Plug

another 400ex, with arenas frame, elka triple rates with ssd, lone star a-arms, lone star axle, lone star swing arm, white bro's e series full pipe, xr 400 cam, hipers all round with eather hole shot mx's or razrs, yellow race cut plactic with a black hood with scoop and that's all i can think of right now :)

Now why would you go and ruin a dream quad with a E-Series and a XR400 cam? ;)

Heres one: (A dream quad) ;)

[cheetah]

^or that.:D

[roostin_dale]

By dream quad should be about half way complete by August....fully completed by January(winter rebuild)

[Glow Plug]

Originally posted by Chef
Now why would you go and ruin a dream quad with a E-Series and a XR400 cam? ;)




because i'm supid that's why! haha :p


ok i've been think about it todya :)


a areans frame, elka's all round, some how make a cr250 counter blanced :eek: lagers +2 aarm +1 swing arm, a ton of motor mods for mx or fmx, tag t2's, hypers, galfer rotors and lines and brakes, red full bore, razrs or turf tammers, a good pipe lol not sure what are some good cr pipes, graydon nerfs, ac bumper , ton of powercoating, and that's all i can think of right now lol

[yzquadracer]

mine, almost completed:blah cant figure out how to make the pics smaller, can someone help me??

[CHAUNCY]

Hey chef,
What color blue is that ?
It looks really good:eek:

[Chef]

Trans Blue over Chrome, Chauncy.