Brake Pedal Dimension

[ytman]

Can anyone tell me the diameter(in mm's) of the shaft on the 400ex brake pedal?1718106808 I think it will work for my project but I want to be sure. Thanks in advance.
Whitey

[ytman]

O.k. how about in inches. Isn't there any 400ex owner out there willing to throw a tape on the end of the brake shaft sticking out the inside of the frame on their sweet a## ride to help a fella out?

[KKiowaTJ]

My pedal was pretty F'ed up and bent to hell, But its looks like 5/8" or 13.5mm/14mm. I measured from the end where the arrow was and it does taper, But the fattest was the 5/8" of an inch. Don't have a dial caliper or I could get it dead nuts, Sorry. Hope this helps somewhat.

[KKiowaTJ]

This is what I had to work with, Hope it helps some.

1718106821

[ytman]

This is what I had to work with, Hope it helps some

Thank you very much. that helps a lot.

[KKiowaTJ]

Thank you very much. that helps a lot.


No problem. If you do need exact, My father has a caliper I can borrow so you know exactly what you are dealing with.