blaster rebuild

[YZkid]

hello i am new two this exriders stuff but i was wwondering how easy it is to rebuild blasters?
thanks in advance.


Tyler

[YZkid]

oh yeah i forgot to say cause i am thinking about geting one but it needs to be rebuilt

[RiPPiNiTuP7]

One of the easiest quads I ever worked on, if you have basic mechnical knowledge and a manual it should be a breeze ;)

[JUSTINcredible]

very very easy if you have some basic mechanicle knowledge

[YZkid]

my uncle is coming here the end of april and he has worked on 4wheelers alot.

[YZkid]

how much would it cost for the parts to rebuild it?

thanks

[AtvMxRider]

VERY easy. If you are just doing a top end rebuild I would say under $200 for parts and any machine work.

[YZkid]

just for the parts we would be doing the work.

thanks

[AtvMxRider]

Originally posted by YZkid
just for the parts we would be doing the work.

thanks

If it doesn't need to be bored you are looking at about $150

[lex luger]

thats if it just needs a piston kit, not saying the dome it shot, or theres crap in the base, and the crank and bearins are alright

[YZkid]

is boring that bad on the motor or not?

[blasterrider123]

Hi boring the motor isnt that bad all it does is gives you more power. if you want a little more info on blasters go to www.blasterhq.com and is you arent going to bore it out and its stock i was looking at piston kits for about $90 they were wisco piston kits

[YZkid]

blasterrider123 where did you find the piston kit at? ok i will look at that thanks.

[lex luger]

boring it over from stock(say you go from std. to 20 over) isnt going to give you no power, maybe like .2, you'll only notice a difference(if you JUST bore it) going from standard, to maxed out...