PDA

View Full Version : Fram Oil Filter



atvtrailrider
12-14-2001, 11:06 AM
I dont know how to install my Fram Oil fillter, for my 400ex. :confused: Could anyone tell me how?

12-14-2001, 11:56 AM
There's a plate with 2 bolts holding it on,,on the right side of your motor,,that's were the oil filter goes,,ya might wanna drain your oil first,,,your owners manual will show you how to do this..

atvtrailrider
12-14-2001, 12:28 PM
Thanks! We bought the quad used, so don't have an owner's manual handy. I'm trying to do this without my dad, so sorry if it sounded like a "too easy" question. I appreciate your help, instead of a snotty answer....

:square

12-14-2001, 01:06 PM
Well this cover I'm talking about is the size of a coke can,,it's round,,make sure you install the filter the correct way,should be labeled on the filter. and you'll only need 2 quarts of oil for the job..

4punksdad
12-14-2001, 07:06 PM
also,
there are 2 places to drain the oil from. one is on the bottom of the reservior, and the other is a small bolt near the shifter.

alos, if your oil filter came with a new O-ring, change it too.

when refilling your oil, you will only be able to get about 1.75 quarts into the bike. start it & let it run a few seconds. then shut it off & add the rest of the second quart.

Leo
12-14-2001, 10:04 PM
www.exriders.com/tech/oil.shtml

:)

Leo