nkeen07
10-19-2013, 09:11 AM
Hi guys. I recently acquired a Honda 400ex that I was planning on getting back into racing in the sport class. At the time I purchased it, the guy said the solenoid was bad and that it ran perfectly when he parked it. Well, I knew that likely wasn't the case after trying to turn it over and having no success. Against my best judgement I went ahead and purchased it. Long story short...a valve had failed, so the head and piston are trashed. I just don't have the money to put into it right now and the wife is saying it's gotta go. So...my loss is your gain. Please feel free to ask any questions and I'll do my best to answer. As you can see below, these are all top of the line XC parts for a fraction of new cost.
I can deliver any of these parts to Ironman, ship, or meet elsewhere. I'll take cash, check, or money order.
1. Roll Design Lobo XC front a-arms and tie rods
- Could use new bushings and ball joints
- Red with some paint wear on bottoms
- $350 SOLD
2. Axis Dual Rate Comp/Reb Adjustable remote rez front shocks
- Come with all mounting hardware
- 16 3/4" eye to eye
- Seem to be in good shape
- Valved/sprung for ~180-200 lbs XC
- See picture in post below
- $500 SOLD
3. Axis Single rate Comp Adjustable remote rez rear shock
- Comes with all mounting hardware
- 16 3/4" eye to eye
- Travel action is good and appears to be in pretty good shape
- Valved/sprung for ~180-200 lbs XC
- See picture in post below
- $395 SOLD
4. Laegar's Swingarm (believe it is +1, but will confirm)
- Set up for 250r rear caliper
- Red with minor scratching
- Has skidplate mounts
- Was professionally reinforced on right side (I think it was preventative b/c I cannot see any cracking)
- In need of pivot bearings
- $205
5. Roll Design Anti-vibe Chrome Stem (believe it is +0 but see risers below)
- Appears to be good and straight
$125 SOLD
http://i945.photobucket.com/albums/ad297/nkeen07/IMG_2568.jpg (http://s945.photobucket.com/user/nkeen07/media/IMG_2568.jpg.html)
6. TAG 1 1/8" handlebar risers
- Add 1" to stem height
- Black
- $30 SOLD
7. TAG T2 bars
- Believe they are CR Hi
- Black w/black Oury Grips installed
- $28 SOLD
8. Denton 7 way adjustable stick stabilizer
- Works well
- $50
http://i945.photobucket.com/albums/ad297/nkeen07/IMG_2567.jpg (http://s945.photobucket.com/user/nkeen07/media/IMG_2567.jpg.html)
9. (2) ITP T9 10x5 front Beadlocks
- Appear to be good/straight
- Normal scuffs and scratches, but no dings
- $125/ pr SOLD w/ProLock rings
10. (2) ITP T9 10x5 wheels w/ITP Holeshot XC 22x7-10
- 4+1 offset
- Wheels appear straight w/just normal scratches
- Tires ~75% tread
- $120
- See post below for picture
11. (2) Douglas 9x9 beadlock wheels w/ITP Holeshot XC 20x11-9
-One tire has a slow leak and 2 plugs. Other has a tube.
- 4+5 offset
- Wheels appear straight w/just normal scratches
- Tires ~70% tread
- $190
12. (2) ITP T9 10x5 beadlock wheels black w/Kenda Klaw MXRs
- 3+2 offset
- Wheels appear straight and nearly new
- Tires ~75% tread
- $225
http://i945.photobucket.com/albums/ad297/nkeen07/IMG_2560.jpg (http://s945.photobucket.com/user/nkeen07/media/IMG_2560.jpg.html)
13. (2) ITP T9 9x8 beadlock wheels black/red w/Kenda Klaw MXRs
- The center on one of the wheels is trashed (un-usable)
- 3+5 offset I believe
- Tires ~75% tread
- $125
14. AC Pro Peg Heelguard Nerfs
- Black w/some chipping
- No mounting hardware. Will confirm if stock hardware can be used.
- $60 SOLD
15. Laegar's Subframe
- Red with powder coat rubbed from plastic and airbox
- Removable Grab bar upgrade
- Comes with hardware, including seat bracket
- $165 SOLD
16. PRM 250r Style desert grab bar
- Straight with minimal scratches
- $30 SOLD
17. Web Cams #479 Camshaft
- Great all around cam in great shape. Similar to HC Stg II
- See post below for picture
- $110
18. FMF Powercore 4 full exhaust
- Great shape with mounting hardware
- $245 SOLD
http://i945.photobucket.com/albums/ad297/nkeen07/IMG_2552.jpg (http://s945.photobucket.com/user/nkeen07/media/IMG_2552.jpg.html)
19. OEM seat with CEET Gripper Seat Cover
- Great shape foam and cover w/no tears
- See post below for picture
- $55
20. IMS Dry Break 4.3 gallon oversize tank (receiver and dump can sold)
- Black and in good shape
- $100
http://i945.photobucket.com/albums/ad297/nkeen07/IMG_2561.jpg (http://s945.photobucket.com/user/nkeen07/media/IMG_2561.jpg.html)
21. Lonestar axle and sprocket hub
- Will confirm length/spacing tomorrow
- Pretty good shape with just normal scratches
- $115
22. Lonestar anti-fade brake locknut
- Pretty good shape with just normal scratches
- $65
23. Lonestar dual row axle bearing carrier
- Bearings appear ok
- $59 SOLD
24. Aluminum frame skid
- Scratched, but comes with hardware
$20
25. Aluminum swingarm skid
- Scratches, but comes with hardware
-$15
26. Braided front lines
- $18 SOLD
27. Braided rear line
- $12 SOLD
28. Stock pegs w/extensions
-$15
29. Aftermarket billet front hubs
-$50 SOLD
30. Black hood
- $15 SOLD
31. Billet (silver) brake reservoir, throttle, and rear master cylinder covers (with allen bolts)
- $25 SOLD
32. Black plastic handguards (maybe Moose) which install to levers
- $10
33. Brand new JT rear sprocket
- 36 tooth
$15 SOLD
http://i945.photobucket.com/albums/ad297/nkeen07/IMG_2576.jpg (http://s945.photobucket.com/user/nkeen07/media/IMG_2576.jpg.html)
34. Brand new Volar chain
- 84 link
-$40
Tons more parts to come, including OEM and some brand new aftermarket parts.
Let me know if you have any questions. The best number to reach me is 317-498-7727. I will do my best to get pictures up over the next few days.
Thanks for your interest.
I can deliver any of these parts to Ironman, ship, or meet elsewhere. I'll take cash, check, or money order.
1. Roll Design Lobo XC front a-arms and tie rods
- Could use new bushings and ball joints
- Red with some paint wear on bottoms
- $350 SOLD
2. Axis Dual Rate Comp/Reb Adjustable remote rez front shocks
- Come with all mounting hardware
- 16 3/4" eye to eye
- Seem to be in good shape
- Valved/sprung for ~180-200 lbs XC
- See picture in post below
- $500 SOLD
3. Axis Single rate Comp Adjustable remote rez rear shock
- Comes with all mounting hardware
- 16 3/4" eye to eye
- Travel action is good and appears to be in pretty good shape
- Valved/sprung for ~180-200 lbs XC
- See picture in post below
- $395 SOLD
4. Laegar's Swingarm (believe it is +1, but will confirm)
- Set up for 250r rear caliper
- Red with minor scratching
- Has skidplate mounts
- Was professionally reinforced on right side (I think it was preventative b/c I cannot see any cracking)
- In need of pivot bearings
- $205
5. Roll Design Anti-vibe Chrome Stem (believe it is +0 but see risers below)
- Appears to be good and straight
$125 SOLD
http://i945.photobucket.com/albums/ad297/nkeen07/IMG_2568.jpg (http://s945.photobucket.com/user/nkeen07/media/IMG_2568.jpg.html)
6. TAG 1 1/8" handlebar risers
- Add 1" to stem height
- Black
- $30 SOLD
7. TAG T2 bars
- Believe they are CR Hi
- Black w/black Oury Grips installed
- $28 SOLD
8. Denton 7 way adjustable stick stabilizer
- Works well
- $50
http://i945.photobucket.com/albums/ad297/nkeen07/IMG_2567.jpg (http://s945.photobucket.com/user/nkeen07/media/IMG_2567.jpg.html)
9. (2) ITP T9 10x5 front Beadlocks
- Appear to be good/straight
- Normal scuffs and scratches, but no dings
- $125/ pr SOLD w/ProLock rings
10. (2) ITP T9 10x5 wheels w/ITP Holeshot XC 22x7-10
- 4+1 offset
- Wheels appear straight w/just normal scratches
- Tires ~75% tread
- $120
- See post below for picture
11. (2) Douglas 9x9 beadlock wheels w/ITP Holeshot XC 20x11-9
-One tire has a slow leak and 2 plugs. Other has a tube.
- 4+5 offset
- Wheels appear straight w/just normal scratches
- Tires ~70% tread
- $190
12. (2) ITP T9 10x5 beadlock wheels black w/Kenda Klaw MXRs
- 3+2 offset
- Wheels appear straight and nearly new
- Tires ~75% tread
- $225
http://i945.photobucket.com/albums/ad297/nkeen07/IMG_2560.jpg (http://s945.photobucket.com/user/nkeen07/media/IMG_2560.jpg.html)
13. (2) ITP T9 9x8 beadlock wheels black/red w/Kenda Klaw MXRs
- The center on one of the wheels is trashed (un-usable)
- 3+5 offset I believe
- Tires ~75% tread
- $125
14. AC Pro Peg Heelguard Nerfs
- Black w/some chipping
- No mounting hardware. Will confirm if stock hardware can be used.
- $60 SOLD
15. Laegar's Subframe
- Red with powder coat rubbed from plastic and airbox
- Removable Grab bar upgrade
- Comes with hardware, including seat bracket
- $165 SOLD
16. PRM 250r Style desert grab bar
- Straight with minimal scratches
- $30 SOLD
17. Web Cams #479 Camshaft
- Great all around cam in great shape. Similar to HC Stg II
- See post below for picture
- $110
18. FMF Powercore 4 full exhaust
- Great shape with mounting hardware
- $245 SOLD
http://i945.photobucket.com/albums/ad297/nkeen07/IMG_2552.jpg (http://s945.photobucket.com/user/nkeen07/media/IMG_2552.jpg.html)
19. OEM seat with CEET Gripper Seat Cover
- Great shape foam and cover w/no tears
- See post below for picture
- $55
20. IMS Dry Break 4.3 gallon oversize tank (receiver and dump can sold)
- Black and in good shape
- $100
http://i945.photobucket.com/albums/ad297/nkeen07/IMG_2561.jpg (http://s945.photobucket.com/user/nkeen07/media/IMG_2561.jpg.html)
21. Lonestar axle and sprocket hub
- Will confirm length/spacing tomorrow
- Pretty good shape with just normal scratches
- $115
22. Lonestar anti-fade brake locknut
- Pretty good shape with just normal scratches
- $65
23. Lonestar dual row axle bearing carrier
- Bearings appear ok
- $59 SOLD
24. Aluminum frame skid
- Scratched, but comes with hardware
$20
25. Aluminum swingarm skid
- Scratches, but comes with hardware
-$15
26. Braided front lines
- $18 SOLD
27. Braided rear line
- $12 SOLD
28. Stock pegs w/extensions
-$15
29. Aftermarket billet front hubs
-$50 SOLD
30. Black hood
- $15 SOLD
31. Billet (silver) brake reservoir, throttle, and rear master cylinder covers (with allen bolts)
- $25 SOLD
32. Black plastic handguards (maybe Moose) which install to levers
- $10
33. Brand new JT rear sprocket
- 36 tooth
$15 SOLD
http://i945.photobucket.com/albums/ad297/nkeen07/IMG_2576.jpg (http://s945.photobucket.com/user/nkeen07/media/IMG_2576.jpg.html)
34. Brand new Volar chain
- 84 link
-$40
Tons more parts to come, including OEM and some brand new aftermarket parts.
Let me know if you have any questions. The best number to reach me is 317-498-7727. I will do my best to get pictures up over the next few days.
Thanks for your interest.