anybody know how to get ahold of prp racing

[shadd_27]

need dave porter's email or phone number i went to the www.prpracingatv.com site and it has no contact info im needing to order a quadzilla intake boot and adapters for my new crf hybrid i already have the 250r air box just need to get the rest of it to make it work

or does anybody on here have the quadzilla lt500r carb to air box intake tube and adaptor to fit the 250r air box i will buy it from you

[shadd_27]

pics of the area

[Langbolt]

He's a contributing writer over at ATV scene .....maybe try contacting them ? :)

[shadd_27]

He's a contributing writer over at ATV scene .....maybe try contacting them ? :)

thanks i emailed them hopefully that gets me what i need

[shadd_27]

He's a contributing writer over at ATV scene .....maybe try contacting them ? :)

thanks i emailed them hopefully that gets me what i need

[laeger400]

You might want to try the yfz intake boot. Depending on the chassis you got it works really well.


http://i1109.photobucket.com/albums/h426/jdub160/IMG_15587815143978.jpg


http://i1109.photobucket.com/albums/h426/jdub160/IMG_15609217335140.jpg

[shadd_27]

Its the prp chassis I got it off rob coonrod he actually told me to talk to you about making a flip top subframe if I wanted one, but do you make a setup you could sell for the air box setup?

[laeger400]

I make these airboxes now and just use the yfz intake boot. I also build fliptops.

[shadd_27]

What year yfz intake boot and how much is a box from you, with your setup do you have to have an adapter to fit the intake to the air box like the lt500r to the 250r box does?

[Derrick Adams]

What year yfz intake boot and how much is a box from you, with your setup do you have to have an adapter to fit the intake to the air box like the lt500r to the 250r box does?

Shadd, all the YFZ air boots are the same. You can use mine to mock it up. I also have an FCI intake you can try too. B-Rob can build you a box easy. For that matter the stock YFZ box may work just fine.

[shadd_27]

OK I'll mock yours up and see how it works and we will go from there

[laeger400]

My setup uses the carb yfz boot and a prodesign pro flow adapter and filter.

[laeger400]

This setup will work great on that bike with the crf 450 linkage. The stock yfz box will hit the swing arm

[laeger400]

http://i1109.photobucket.com/albums/h426/jdub160/IMG_0035_zps16fc7d94.jpg


http://i1109.photobucket.com/albums/h426/jdub160/IMG_0036_zpsb5260b80.jpg


http://i1109.photobucket.com/albums/h426/jdub160/IMG_0038_zpsd0aa5aec.jpg

I built the subframe cut up and reweld the trx450r exhaust to fit the crf. I also machined the exhaust bracket and made him a new grab bar.

Jerry

[shadd_27]

It has cr500 linkage not that it matters I guess but OK I'll go yfz boot and pro design adaptor and filter

[laeger400]

If your prp is the one you posted pics of it has a crf 450 linkage. The cr500 and crr450 linkage are close but the linkage mounts on the swingarm are in different spots.

[shadd_27]

he told me it was a cr500 link im not saying your wrong just going with what he told me, the two are very similar from looking around at pictures, is that the only difference is swingarm placement?

[laeger400]

he told me it was a cr500 link im not saying your wrong just going with what he told me, the two are very similar from looking around at pictures, is that the only difference is swingarm placement?

For the most part. If its a prp crf it has a crf450 linkage. Cr500 link mounts in the center of the rectangle tubing and crf link mounts are at the bottom of the rectangle tubing.

[laeger400]

http://i1109.photobucket.com/albums/h426/jdub160/FB_IMG_13815385059349201.jpg

airboxes welded.

[shadd_27]

ill let you know within a week if im going that route thanks man they look great

[laeger400]

No prob dude. I don't really have a thread so I just kinda thread jacked. Sorry dude.

Thanks Jerry

[shadd_27]

No problem good to have people like you making quality parts for these at good prices


On another note I did get the info on how to get ahold of Porter at Prp if anybody needs it

[LT250RMan]

Contact Tigor Racing, Tony used to build all of PRP's chassis's.

Tony Pettinelli
BnP Machine / TRC
612 Calvert St
Rome, NY 13440

Phone 315-337-6399
Fax 315-337-8178
pettine@attg.net
www.tigorracing.com

info@tigorracing.com

[shadd_27]

thanks man i got ahold of him through a mutual friend and got all the info i needed