Lmracing
09-16-2013, 05:14 PM
Parting out a cannondale cannibal. All prices do not include shipping.
+3 Walsh long travel a arms no dents or dings all joints are tight sold
Walsh +1 stem with 1 1/8" bar clamp, key and kill switch $200
Rpm dominator axle some rust pits $150
Billet axle lock nut $40
Rad tapered bearing axle carrier $60
Grab bar $20
Ac bumper $30
Axis front shocks triple rate comp, rebound adjust need to be serviced
Shafts are not pitted just needs seals and oil. Sold.
Engine, injectors, throttle body, computer, and harness Sold.
I was told the engine runs it was leaking antifreeze into the oil.
I never ran it. I was also told it is a 465 but have no proof of it.
The head looks ported and they changed the injector angle on the intake
I have all the rest of the quad so if you need any of the stock parts
just ask I probably have it and will sell it cheap.
1718105103
1718105104
1718105105
1718105106
1718105107
+3 Walsh long travel a arms no dents or dings all joints are tight sold
Walsh +1 stem with 1 1/8" bar clamp, key and kill switch $200
Rpm dominator axle some rust pits $150
Billet axle lock nut $40
Rad tapered bearing axle carrier $60
Grab bar $20
Ac bumper $30
Axis front shocks triple rate comp, rebound adjust need to be serviced
Shafts are not pitted just needs seals and oil. Sold.
Engine, injectors, throttle body, computer, and harness Sold.
I was told the engine runs it was leaking antifreeze into the oil.
I never ran it. I was also told it is a 465 but have no proof of it.
The head looks ported and they changed the injector angle on the intake
I have all the rest of the quad so if you need any of the stock parts
just ask I probably have it and will sell it cheap.
1718105103
1718105104
1718105105
1718105106
1718105107