Pvl is shockn me

[sillery17]

Ok can any one help me
Have a pvl ignition when I touch the motor and front brake it shocks me
What is wrong and how do I fix it
I have went threw every wire and the connections to coil can't find anything wrong??

[chris p.]

my son was getting voltage on the throttle lever.ran a ground from the engine case to the frame and it solved the problem.make sure you have a bare metal ground

[sillery17]

my son was getting voltage on the throttle lever.ran a ground from the engine case to the frame and it solved the problem.make sure you have a bare metal ground

Thanks I will try that

[fomospede]

ive heard that tethers wired backwards can leave stray current

[nastynotchback1]

ive heard that tethers wired backwards can leave stray current

They will and it hurts pretty good.

[fomospede]

They will and it hurts pretty good.
hell yeah the kid cranked his quad over while i was holding cap it left a black mark !!

[GetOut&Ride]

I can second the tether kill switch issue... cut both wires while swapping out motors (yeah I don't know why either the one grounded to frame could have stayed connected), figured 50/50 shot of hooking back up right... got me pretty good, didn't go buy lottery ticket that night

[chris p.]

wow !! yeah,ours wasn't that bad.it only did it once in awhile but after switching to bikes there's no more worries !!!!!!! lol