PDA

View Full Version : FS: Race Ready 400ex. Fresh motor.



e46_330i
08-19-2013, 02:07 PM
Selling to get a side by side. Don't have the use for a sport bike any longer. Text me with any questions. 919-761-4014. Motor freshened up, chain & sprockets, carrier bearings, spal fan, Carb & brakes have about 10 hours of ride time on them. 3 of them being break in time on the motor. Runs great with no issues! Make me an offer!

*Stock bore piston with 11:1 compression ratio so its pump gas safe
*HMF Full exhaust
*Air box lid removed and drilled & a BMC Filter
*Hot cams Stage 2 cam
*Hardened Rockers
*Upgraded springs
*Exteme Port N' Polish
*Valve job with seals
*Spal 4" puller fan mounted on the oil cooler on a switch to keep it cool. It is much better than any larger cooler/tank combination.
*CRF450 Timing chain, OEM Tensioner, and both guides.
*Keihn 42mm carb off of the 04/05 450r with ZRPilot's billet adapter
*Valves just adjusted again after break in period and set to .004" Intake & .005" exhaust
*Henson Clutch
*Motion Pro clutch cable
*ARC clutch and front brake levers.
*Pro Taper Conquer bars
*Clip on kill switch
*Brand new Ceramic pads front and rear
*Steel braided brake lines
*ARC rear brake lever
*Lonestar Racing parking brake block off
*New all balls bearing kit installed.
Suspension/Body/Frame/Tires/Wheels:
*Elka Triple Rate front shocks with external reservoirs. Valved for 185lb rider.
*Custom Axis rear shock with external reservoir mounted on right side of the frame. Also valved for 185lb rider.
*Houser +2 A-Arms up front
*04/05 450r swingarm
*G Force Extended Axle and G Force Extended Hubs for a total of +4. The bike is about 48" wide all around and corners like a dream. Never have I had an issue with this bike tipping over in corners.
*Janssen Steering Stabilizer
*Grey Maier Race Cut plastics
*One Industries Seat. Has a few tiny rips but they haven't spread in 2 years.
*Spastic graphics kit
*AC Racing front bumper
*Pro Armor Nerf Bars with solid heel guards
*AC Racing wide foot pegs
*Gusseted frame & subframe
*Maxxis RZR tires up front and Carlisle Turf Tamers in the rear. The Turf Tamers hook up exceptionally well in the hole shot on most surfaces.
*Bead lock front wheels & black ITP solid rear wheels.

http://i1091.photobucket.com/albums/i400/Anderson_Wilder/null_zps5d18c3a6.jpg

e46_330i
09-05-2013, 01:01 PM
Bump