mickley.28
08-09-2013, 11:32 AM
This is a fully built six5 design Pro Caliber 450r. Everything is in great shape and has very low hours (less than 10 hours on whole bike, less than 5 hours on completely fresh motor). No expenses spared on this bike it has the best of everything and could be raced at the pro level.
Six5design a arms ---- ltr spindles, hubs, brakes
six5design stem ----- ltr flag
six5design bar mount
six5design adjustable subframe
six5design engine lowering kit
six5design swingarm
six5design link
fox gen 2 shocks
lonestar axle
lonestar axle nut
dwt wheels
maxxis tires
rath nerfs
rath bumper
rath grab bar
precision pro steering stab
pro armor kill switch
pro taper bars
odi grips
Motor: Full Pro Built motor including port, valves, cam, 14.1 custom cp piston...ect VERY FAST
HINSON BTL CLUTCH With HINSON COVER (not in the pictures)
bored carb
vortex ignition with tokyo mods pro timing
motoworks gen 2 exhaust
oversized radiator
much more i'm forgetting
This bike was built to run in the PRO class and i purchased to run pro am but injury kept me from racing it this year. When I bought it in may everything was brand new and i've put less than 10 hours on it. I broke the left side case by landing on the shifter so while the motor was apart I had everything replaced.... crank, tranny, piston, case, bearings...ect this motor is brand new with 3 rides on it since rebuilt. Serious inquires only!!! Do not need to sell so no low ball offers. $8,000 Located in Ohio. 740-504-7798 call or txt do not pm or reply to this thread because I don't get on here very often. Thanks, Brad
Six5design a arms ---- ltr spindles, hubs, brakes
six5design stem ----- ltr flag
six5design bar mount
six5design adjustable subframe
six5design engine lowering kit
six5design swingarm
six5design link
fox gen 2 shocks
lonestar axle
lonestar axle nut
dwt wheels
maxxis tires
rath nerfs
rath bumper
rath grab bar
precision pro steering stab
pro armor kill switch
pro taper bars
odi grips
Motor: Full Pro Built motor including port, valves, cam, 14.1 custom cp piston...ect VERY FAST
HINSON BTL CLUTCH With HINSON COVER (not in the pictures)
bored carb
vortex ignition with tokyo mods pro timing
motoworks gen 2 exhaust
oversized radiator
much more i'm forgetting
This bike was built to run in the PRO class and i purchased to run pro am but injury kept me from racing it this year. When I bought it in may everything was brand new and i've put less than 10 hours on it. I broke the left side case by landing on the shifter so while the motor was apart I had everything replaced.... crank, tranny, piston, case, bearings...ect this motor is brand new with 3 rides on it since rebuilt. Serious inquires only!!! Do not need to sell so no low ball offers. $8,000 Located in Ohio. 740-504-7798 call or txt do not pm or reply to this thread because I don't get on here very often. Thanks, Brad