Michael88R
06-25-2013, 09:12 PM
2005 Suzuki LT-Z400 quadsport. National Pro mx race quad. This quad is mx race ready and makes a great duner too. This was John Ragon's race bike. He was factory sponsored in 2005. This quad has all the best suspension and engine components from Yoshimura, Walsh Racecraft, and Elka Suspension. It hasn't been ridden much since 2007 and its only been dune ridden. Before the quad was retired from racing, the engine was completely gone through and has low hours since. Rear suspension is a custom setup built only for Suzuki Factory riders. The swingarm and linkage was designed and custom made by Roll Design and Elka suspension. It has tons of travel and soaks up whoops. The engine is a full Yoshimura 450 kit built and ported by Chris Grissom Racing. Doug Gust won the MX championship on the same engine and suspension set up. This is a clean, well built quad. Fun to ride.
Pink slip in hand. Tags paid through 2014. Asking 4000. Sand tires and trail tech lights not included.
Call or text Michael at 559-799-7941. For pics, e-mail miksaltz88@aol.com.
Engine
Yoshimura 450 kit
Big bore cylinder +2mm
Stroker crank +5mm
Yoshimura Cams
Ported and decked head by Chris Grissom Racing, a pro level builder in Tennessee
Yoshimura full exhaust with quiet core. Easy to change when you need it quiet.
Custom Yoshimura DRZ rev box
39mm Keihnn FCR carb
400ex throttle with easy pull. You can ride all day with this throttle!
400ex intake tube and filter for better flow. New K&N filter & outerwear.
New Battery
Chassis and Suspension
Long travel Elka shocks front and rear. Compression and Rebound adjustable
Walsh Racecraft long travel a-arms
Hardkor billet front hubs with Timken taper bearings
Walsh Racecraft custom long travel swingarm with Honda style bearing carrier
Elka custom long travel linkage designed by Doug Roll for the Factory Suzuki riders like Doug Gust
Walsh Racecraft steering stem with 7/8" anti-vibe bar clamps
Pro taper 7/8" bars
Lonestar +4 rear axle
Steel braided brake lines front and rear
Dunlop mx tires from a LTR450
Factory LTR450 wheels
Misc.
DG front stadium bumper
DG grab bar
DG nerf bars with big foot peg
Carbon fiber front nose piece
Pro Taper 7/8 Bars
Pro design kill switch
Pink slip in hand. Tags paid through 2014. Asking 4000. Sand tires and trail tech lights not included.
Call or text Michael at 559-799-7941. For pics, e-mail miksaltz88@aol.com.
Engine
Yoshimura 450 kit
Big bore cylinder +2mm
Stroker crank +5mm
Yoshimura Cams
Ported and decked head by Chris Grissom Racing, a pro level builder in Tennessee
Yoshimura full exhaust with quiet core. Easy to change when you need it quiet.
Custom Yoshimura DRZ rev box
39mm Keihnn FCR carb
400ex throttle with easy pull. You can ride all day with this throttle!
400ex intake tube and filter for better flow. New K&N filter & outerwear.
New Battery
Chassis and Suspension
Long travel Elka shocks front and rear. Compression and Rebound adjustable
Walsh Racecraft long travel a-arms
Hardkor billet front hubs with Timken taper bearings
Walsh Racecraft custom long travel swingarm with Honda style bearing carrier
Elka custom long travel linkage designed by Doug Roll for the Factory Suzuki riders like Doug Gust
Walsh Racecraft steering stem with 7/8" anti-vibe bar clamps
Pro taper 7/8" bars
Lonestar +4 rear axle
Steel braided brake lines front and rear
Dunlop mx tires from a LTR450
Factory LTR450 wheels
Misc.
DG front stadium bumper
DG grab bar
DG nerf bars with big foot peg
Carbon fiber front nose piece
Pro Taper 7/8 Bars
Pro design kill switch