Groves187
05-27-2013, 02:03 PM
I have been riding my dirt bike since they shut down the last good quad track in az so my hybrid has just been sitting and collecting dust. I just did a ground up rebuild on it about a year ago and it has about 20 track days on it since. I had all the shocks serviced, new rotors, heim joints aarm bushings, swing arm bearings. Pretty much any wear item was replaced. I have all receipts for everything that was serviced and replaced.
Parts list
Lsr 250r geo crf450 chassis
Lsr dc-4 lt arms
Lsr dc-2 no-link swinger
Pep big can 8click zps shocks setup for 210lb A class rider
Lsr std stem and fat bar clamp
Lsr subframe
Lsr axle with new anti fade and sprocket hub
Trx450r spindles and brake calipers
Lsr trx450 billet hubs
Douglas shamrock front beadlocks and douglas ultimate rear beadlocks
Itp quadcross tires
Ac nurfs
Fluidyne dual pass radiator with carbon quadtech shrouds
Two sets of plastics one black and one white.
Misc balljoints and tierod ends and other odds and ends
I ran a 04 crf motor with a 06+ trx head and 06+ dasa exhaust that I will include at an additional cost.
You can reach me at 480650zero879
I will do my best to help with some of the shipping if out of state purchase.
It will need a front brake master and a throttle housing. Other than that its a turn key roller.
Nick Groves
Parts list
Lsr 250r geo crf450 chassis
Lsr dc-4 lt arms
Lsr dc-2 no-link swinger
Pep big can 8click zps shocks setup for 210lb A class rider
Lsr std stem and fat bar clamp
Lsr subframe
Lsr axle with new anti fade and sprocket hub
Trx450r spindles and brake calipers
Lsr trx450 billet hubs
Douglas shamrock front beadlocks and douglas ultimate rear beadlocks
Itp quadcross tires
Ac nurfs
Fluidyne dual pass radiator with carbon quadtech shrouds
Two sets of plastics one black and one white.
Misc balljoints and tierod ends and other odds and ends
I ran a 04 crf motor with a 06+ trx head and 06+ dasa exhaust that I will include at an additional cost.
You can reach me at 480650zero879
I will do my best to help with some of the shipping if out of state purchase.
It will need a front brake master and a throttle housing. Other than that its a turn key roller.
Nick Groves