Re Jetting the carb.

[Baxter]

Just wondering when and how much , I have to rejet the stock carb.

Starting from stock build.

Do I need to rejet with removing the airbox lid ?
Do I need to rejet with removing the airbox lid and remove the stock QC ?
Do I need to rejet removing the airbox lid ans adding a slip on exhaust ?

If so by how much on all the above mods.

[forestbrian88]

Yes... and I am as new to jetting as you are so for how much youll have to get someone with better knowledge then I
but if you want to DIY as i am doing
here is a helpfull Link that i got from JohnDoe83

http://www.jetsrus.com/FAQs/FAQ_rejetting_101_how_to_rejet.htm

[Baxter]

Would I have to rejet removing the choke ?

[CJM]

^ Gain is so minimal dont bother removing the choke.

[Baxter]

^ Gain is so minimal dont bother removing the choke.

Trying to get the best out a stock setup. Any ideas.
Building 2 700xx motors , one stock and one 753cc MX build so money is tight till the winter.

[CJM]

Grind the welds inside the header, throw away the airbox lid, bout all you can really do on a stock motor. Exhaust, higher comp piston and hotcam wake the motor up alot.