dancap
05-17-2013, 03:11 PM
How's it going!
6 Months Ago I traded my 2011 Can-am Ds450xmx for this Fully Built Outlaw 450MXR. The fastest quad I have ever ridden and one of the best handling to boot. Everything was very well maintained. I only rode this once since I have had it. Bought a house and a new baby girl as well as being very busy with work has set me back on riding. The bottom end has a crack in the case where the oil plug is. Therefore it is going up for part out! Everything must go. Own a parts and service shop where the quad is starting to be taken apart as we speak. Every part listed is in good condition all the way down to the bearings that spin freely. Top end of the motor is perfect down to the clutches, again just where the oil screen is on the bottom under the skid plate has a crack in the case and the allen head bolt is stuck in there. Southside polaris built the quad for a pro-am rider and rage built the motor.
2010 Polaris Outlaw 40mxr (All Prices are shipped to lower 48 States)
Chassis/Suspension/Controls:
-Frame-Stock Pc'ed white with battery to front relocation. PC still in great condition with normal wear- $450
-Walsh Flow +3 Long Travel A-arms - $850 (will do package deal with Front shocks below $1,525)
-Stock Swingarm PC'ed Blue with bearing carrier and - $125
-Walsh Steering Stem with Anti-Vibe CLamp - $195
-Precision Pro Steering Stabilizer - $295
-Stock Axle - $75
-Stock Locknut - $15
-Stock Front Hubs with bearings- $55
-Rath +3 Rear Hubs (honda bolt pattern)- $160
- Fasst Flexx handle bars 15 degree - Sold
-Honda trx450r thumb throttle and cable - Sold
-Rath 44 Series Monster Pegs - $245
-Rath MX Front Bumper - $75
-Rath Mx Rear Grab bar with plastic supports - $90
-Fox float GenII evol DSC Front Shocks - $895
-Fox podium x dsc genII piggyback - $625
-Streamline SS brake Lines - $50
Engine:
- Complete Motor: Rage ATV National Port, polish, decked head with wiseco 13.5:1 Piston, hot cams stage I, EBC HD Clutches Comes complete with top end in perfect running condition making 60hp. Bottom end is in good condition besides where the oil screen plug on the bottom the bolt is stripped and has a crack in it. Right side case will need to be replaced. Motor runs perfect. Have not started it since the plug stripped out. Low hours? rebuilt last winter with 2-3 rides on motor - $1,750
-39 MM FCR carb with custom lines - $175
-Terry Designs Full Exhaust, newer packing sounds amazing - $265
-Fluidyne Oversized Radiator with Full Time Running Fan - $200
-Custom KTM design Airbox/Air boot and KN filter - $150
Body:
-Maier Black Plastics - $75 Pick up Only!
-White Quad tech Hood with HID Light and bracket - $75
-Seat with Stomp Seat cover - $115
-Powermadd Hand Guards with brackets - $50
Other:
-Honda Trx450r front brake master cylinder / brake lever - SOLD
-lowered 1.5' Subframe- $165
All stock parts are for sale as well and I'm sure I am missing some other parts
I accept Credit Cards, Paypal or money orders. Cash in person.
http://i6.photobucket.com/albums/y240/dancap/2010%20Polaris%20Outlaw%20450mxr/_MG_6340_zpsf5f1ce63.jpg (http://s6.photobucket.com/user/dancap/media/2010%20Polaris%20Outlaw%20450mxr/_MG_6340_zpsf5f1ce63.jpg.html)http://i6.photobucket.com/albums/y240/dancap/2010%20Polaris%20Outlaw%20450mxr/_MG_6335_zps256226c4.jpg (http://s6.photobucket.com/user/dancap/media/2010%20Polaris%20Outlaw%20450mxr/_MG_6335_zps256226c4.jpg.html)http://i6.photobucket.com/albums/y240/dancap/2010%20Polaris%20Outlaw%20450mxr/_MG_6350_zps76fbd510.jpg (http://s6.photobucket.com/user/dancap/media/2010%20Polaris%20Outlaw%20450mxr/_MG_6350_zps76fbd510.jpg.html)http://i6.photobucket.com/albums/y240/dancap/2010%20Polaris%20Outlaw%20450mxr/_MG_6351_zps3ad0370d.jpg (http://s6.photobucket.com/user/dancap/media/2010%20Polaris%20Outlaw%20450mxr/_MG_6351_zps3ad0370d.jpg.html)http://i6.photobucket.com/albums/y240/dancap/2010%20Polaris%20Outlaw%20450mxr/_MG_6352_zps2975eaf1.jpg (http://s6.photobucket.com/user/dancap/media/2010%20Polaris%20Outlaw%20450mxr/_MG_6352_zps2975eaf1.jpg.html)
6 Months Ago I traded my 2011 Can-am Ds450xmx for this Fully Built Outlaw 450MXR. The fastest quad I have ever ridden and one of the best handling to boot. Everything was very well maintained. I only rode this once since I have had it. Bought a house and a new baby girl as well as being very busy with work has set me back on riding. The bottom end has a crack in the case where the oil plug is. Therefore it is going up for part out! Everything must go. Own a parts and service shop where the quad is starting to be taken apart as we speak. Every part listed is in good condition all the way down to the bearings that spin freely. Top end of the motor is perfect down to the clutches, again just where the oil screen is on the bottom under the skid plate has a crack in the case and the allen head bolt is stuck in there. Southside polaris built the quad for a pro-am rider and rage built the motor.
2010 Polaris Outlaw 40mxr (All Prices are shipped to lower 48 States)
Chassis/Suspension/Controls:
-Frame-Stock Pc'ed white with battery to front relocation. PC still in great condition with normal wear- $450
-Walsh Flow +3 Long Travel A-arms - $850 (will do package deal with Front shocks below $1,525)
-Stock Swingarm PC'ed Blue with bearing carrier and - $125
-Walsh Steering Stem with Anti-Vibe CLamp - $195
-Precision Pro Steering Stabilizer - $295
-Stock Axle - $75
-Stock Locknut - $15
-Stock Front Hubs with bearings- $55
-Rath +3 Rear Hubs (honda bolt pattern)- $160
- Fasst Flexx handle bars 15 degree - Sold
-Honda trx450r thumb throttle and cable - Sold
-Rath 44 Series Monster Pegs - $245
-Rath MX Front Bumper - $75
-Rath Mx Rear Grab bar with plastic supports - $90
-Fox float GenII evol DSC Front Shocks - $895
-Fox podium x dsc genII piggyback - $625
-Streamline SS brake Lines - $50
Engine:
- Complete Motor: Rage ATV National Port, polish, decked head with wiseco 13.5:1 Piston, hot cams stage I, EBC HD Clutches Comes complete with top end in perfect running condition making 60hp. Bottom end is in good condition besides where the oil screen plug on the bottom the bolt is stripped and has a crack in it. Right side case will need to be replaced. Motor runs perfect. Have not started it since the plug stripped out. Low hours? rebuilt last winter with 2-3 rides on motor - $1,750
-39 MM FCR carb with custom lines - $175
-Terry Designs Full Exhaust, newer packing sounds amazing - $265
-Fluidyne Oversized Radiator with Full Time Running Fan - $200
-Custom KTM design Airbox/Air boot and KN filter - $150
Body:
-Maier Black Plastics - $75 Pick up Only!
-White Quad tech Hood with HID Light and bracket - $75
-Seat with Stomp Seat cover - $115
-Powermadd Hand Guards with brackets - $50
Other:
-Honda Trx450r front brake master cylinder / brake lever - SOLD
-lowered 1.5' Subframe- $165
All stock parts are for sale as well and I'm sure I am missing some other parts
I accept Credit Cards, Paypal or money orders. Cash in person.
http://i6.photobucket.com/albums/y240/dancap/2010%20Polaris%20Outlaw%20450mxr/_MG_6340_zpsf5f1ce63.jpg (http://s6.photobucket.com/user/dancap/media/2010%20Polaris%20Outlaw%20450mxr/_MG_6340_zpsf5f1ce63.jpg.html)http://i6.photobucket.com/albums/y240/dancap/2010%20Polaris%20Outlaw%20450mxr/_MG_6335_zps256226c4.jpg (http://s6.photobucket.com/user/dancap/media/2010%20Polaris%20Outlaw%20450mxr/_MG_6335_zps256226c4.jpg.html)http://i6.photobucket.com/albums/y240/dancap/2010%20Polaris%20Outlaw%20450mxr/_MG_6350_zps76fbd510.jpg (http://s6.photobucket.com/user/dancap/media/2010%20Polaris%20Outlaw%20450mxr/_MG_6350_zps76fbd510.jpg.html)http://i6.photobucket.com/albums/y240/dancap/2010%20Polaris%20Outlaw%20450mxr/_MG_6351_zps3ad0370d.jpg (http://s6.photobucket.com/user/dancap/media/2010%20Polaris%20Outlaw%20450mxr/_MG_6351_zps3ad0370d.jpg.html)http://i6.photobucket.com/albums/y240/dancap/2010%20Polaris%20Outlaw%20450mxr/_MG_6352_zps2975eaf1.jpg (http://s6.photobucket.com/user/dancap/media/2010%20Polaris%20Outlaw%20450mxr/_MG_6352_zps2975eaf1.jpg.html)