kasea 90 questions

[thepowester]

Ok so since my old thread got misplaced during the face lift I'm gonna make a new one. It has been determined that I have a kasea skyhawk 90 that I'm almost certain has been raced at some point. The writing harness has been stripped down to bare minimum and the guy I bought it from redneck rigged a Chevy coil pack on it cause it had a bad coil seems to work just fine but it will be replace with original equipment. Now I have come to the understanding that the stick carb has what I believe it's an electric choke on it, but it is no longer hooked up.it's there a mod to bypass this or a better carb to put on it? And all mod inputs are welcome as I am new to the minis.http://i286.photobucket.com/albums/ll86/thepowester/20130501_135324.jpghttp://i286.photobucket.com/albums/ll86/thepowester/20130501_135311.jpghttp://i286.photobucket.com/albums/ll86/thepowester/20130501_135318.jpghttp://i286.photobucket.com/albums/ll86/thepowester/20130501_135257.jpg

[Logan #34's Dad]

Find yourself a PE24 or 28 or PWK 24 or 28 and put on it. With that being said, you may need a different intake boot...the stock intake boot will be too small...assuming the stock one is still on it.
I've got a PE28 I'll sell ya for $50 plus shipping.

[Logan #34's Dad]

Next pickup a pipe for it. There are plenty of people on here that have a pipe laying around .....

[thepowester]

What's a decent pipe for it and who's got what laying around?

[thepowester]

Anyone know anything about this swinger or a armshttp://i286.photobucket.com/albums/ll86/thepowester/20130505_165853.jpghttp://i286.photobucket.com/albums/ll86/thepowester/20130505_165844.jpg

[chris p.]

swinger looks similar to ones I've seen on fleabay.has adjustable holes for lower shock mount.a-arms are the same as Polaris single arm design.

[thepowester]

So are they good bad decent? I'm new to minis and know nothing about them but not new to the quad game. I've got it all stripped down getting done up for his b-day in June

[TTracer#22]

So are they good bad decent? I'm new to minis and know nothing about them but not new to the quad game. I've got it all stripped down getting done up for his b-day in June

I have a pipe Koso pipe and PE 20 or 28mm care 1 carb and pipe 125.00 + shipping im in California just some stuff I had left over

[nastynotchback1]

I have a long travel set-up for a Kasea with elkas and all disk brake stuff if you decide to change it up.Has the stem and swinger and lsr billet hubs.I will let it go cheap.