Need help with w/ Laeger brake pedal setup

[tbone250r]

I need a brake pedal that is compatible with my Laeger. There are NO threads on the inside of the mount for a bolt. There is only a hole for a cotter pin. Does anybody have a pedal? Or any suggestions?

Here is is with my stock pedal
http://i1060.photobucket.com/albums/t457/tbone0785/TRX250R/P1050137_zps3ed74f51.jpg




Also...look at the angle the rod is on. This was like this on my stock frame, LSR frame, and now Laeger frame. Do I have a different brake pedal?
http://i1060.photobucket.com/albums/t457/tbone0785/TRX250R/P1050138_zps78d67f3d.jpg

[C41Xracer]

its probably a cr250 pedal

[protrax]

Your brake pedal is not a 250R pedal buy a 250r pedal and you will be all set

[C41Xracer]

Originally posted by protrax
Your brake pedal is not a 250R pedal buy a 250r pedal and you will be all set

Here is is with my stock pedal

he obviously has the pedal off of his quad (please correct me if im wrong)

[tbone250r]

that pedal is what came with my stock framed 86 when I bought it.

I'm thinking that's not a TRX250r pedal, the rod was at a severe angle like that when I bought it, even though its now on a Laeger frame.

[jerorski]

You just need a stock 250r pedal, thats not one, i have one with new black powder if needed.

[tbone250r]

Picked up a Hinson pedal and solved all my problems.

Thanks guys.

[Burns310r]

Post a picture of it.

I run a stock pedal with a cotter pin.