New Motor Bling!

[AtvKid4Eva]

Today I got some works connection red anodized plugs, Hinson fill plugs and a Hinson High Capacity clutch cover. I reused the stock clutch cover gasket, should i get a new one or is it meant to be reused? Anyone who has a Hinson cover please chime in. Anyway heres a couple pics. Enjoy.

http://i33.photobucket.com/albums/d75/atvkid4eva/photo1-20_zpsf31cb4c2.jpg
http://i33.photobucket.com/albums/d75/atvkid4eva/photo2-21_zps5f44c2ce.jpg

[jjohns5]

Looks nice, I reused mine because it was in good shape, but am replacing it this time around. Technically you should replace it, but use your best judgment...

[AtvKid4Eva]

Yeah mine looked fine, but tomorrow ill probably grab one from the dealer. Last thing I want is to fill it with tranny fluid and have it leak lol

[Balaz_73*00]

Looks sharp man!

[AtvKid4Eva]

Thanks man!

[Charles828]

Look good!! You should change your case saver!
Baldwin is making a good looking one!

[D Bergstrom]

When I went to the Hinson covers on both my 450R's I reused the o-ring's, never had a problem. My race 450R I have changed the o-ring a couple of times over the years just because, but my other 450R I have never changed the o-ring in the 5 or so years since I got the cover. As long as that o-ring is in good shape, I wouldn't worry about it.

Doug

[AtvKid4Eva]

Okay guys, I put a new gasket just to be sure and it's all back together. Hinson says it will hold 150cc more of oil. I'm assuming I can still just fill it up like I have been using the weep hole? The way I look at it is regardless of how much deeper the cover is, it's still going to be at the factory level when it reaches the weep hole. Is this correct?

[the predator]

Yes that is correct