Deuce426
02-09-2013, 08:23 PM
I've finally decided to part with one of my Duncan PC2000 Cylinders since I have 3, and only 2 bikes, so I guess its time for the little guy to go.
The 265 Cylinder was born in April of 2004, has Duncan's mid range porting, and runs a 68.5mm piston. The dome on it is 19cc so it will be for race fuel only. This is a pretty snotty little 265.
The Nikasil is in great shape, and all I would recommend is to put in a new piston and fresh o-rings for the cool head. The o-rings should be fine, but why not change them while its apart. The old piston is included as well, but I'd just start fresh.
There was a little corrosion on the coolant outlet from the head, but it has been cleaned up and is only cosmetic.
The cylinder also comes with a spacer plate so it can be run with the short or long rod cranks. This is not setup for a stroker crank fyi, just stock stroke cranks.
$900 Shipped
The 265 Cylinder was born in April of 2004, has Duncan's mid range porting, and runs a 68.5mm piston. The dome on it is 19cc so it will be for race fuel only. This is a pretty snotty little 265.
The Nikasil is in great shape, and all I would recommend is to put in a new piston and fresh o-rings for the cool head. The o-rings should be fine, but why not change them while its apart. The old piston is included as well, but I'd just start fresh.
There was a little corrosion on the coolant outlet from the head, but it has been cleaned up and is only cosmetic.
The cylinder also comes with a spacer plate so it can be run with the short or long rod cranks. This is not setup for a stroker crank fyi, just stock stroke cranks.
$900 Shipped