PDA

View Full Version : Front bolt patern



Rippen88
01-23-2013, 09:19 PM
What is the front bolt pattern on a kasea 90 it seems smaller then the 110 mm that ppl are saying it is , and can you get a 10 x5 front wheel to fit these smaller patterns. . Thanks

nastynotchback1
01-24-2013, 07:00 AM
Ours was 4/110 but it could be 4/100 like the rear hubs.I am sure that dwt has the rims in the pattern you need.Give them a call.

Rippen88
01-24-2013, 08:10 PM
Thanks for the reply I'm new to this mini quad stuff , after some playing in the garage today figured the front is a 4/110 and rear is a4/100 , my next challenge is gonna be changing the rear axle set up so I can run disc brakes and the smaller TT tires on rear lol

nastynotchback1
01-25-2013, 07:09 AM
i have a durablue axle for a kasea and it will allow you to run disk.I had ours set-up with disk brakes off of an e-ton.

Rippen88
01-25-2013, 10:56 AM
how much for that axle and ya got any thing else that would help this bike out ? and with that axle what else or what all do i get for that , this bike just has the drum brake and pedal set up, like i said im new to the minio world, this is my boys first year running and first bike its a single A arm drum brake , i got it cheap lol had a nice runing hetrick motor with pep shocks so i thaught i would start him out with that but im all ready to find a dual A arm with disc brakes all the way around not sure were to go with it lol ill be running the edt and mwedt series this year but i think im gonna let him run just the mwedt series this year hes prolly not ready for those big national tracks lol

nastynotchback1
01-25-2013, 12:12 PM
Give me a call at 864-323-0356.Be easier to tell you what i got rather than type it all out.Thanks

dyno dan
01-28-2013, 12:20 AM
i have a hetrick dual a arm kasea with elka shocks 2+2 axel with a drum set up and a hole disk set up for the rear with 2 -129 cc 2 stroke motors all new parts never run with xtra pistons cranks and rings 3 xtra ported cylinders ,belts rollers .the motor was built buy my self as i built nascar engines for 12 years .motor has pvl ignition custom reeds and custom intake with a 33 pwk carb. the bike was a national kasea that we bought from a guy in alabama bike is realy a hand full of power and ready to go to a new owner as son has out grown it call if intrested 863 984 2030 thanks for looking dan or you can email me at Mamashell2@verizon.net