is this antifade brake hub for a 250r

[Houser450]

can anyone tell me if this is for a 250r and maybe what brand you think it is

[Houser450]

pic

[deathman53]

looks like it, but the same thing for a 400ex and 450r is nearly the same, except for spacing. Can't tell without measurements, axle width, spline counts and the nut are the same, the difference is the bolt pattern and how long the threaded sleeve is.

[Houser450]

450r only has three bolts on the hub does anybody know about the 400ex

[Houser450]

Ok I see the 400ex has 4 bolts also can anyone tell me the amount of splines on a ex and a 250r

[hondaREX]

Looks like my 250r Durablue hub. Same splines on an EX and R brake hub. I just checked on my EX axle and my stock EX hub, Durablue hub like yours and a stock 250R and another aftermarket 250R one i have all fit the EX axle.

250R rear rotor is smaller than an EX as is the bolt pattern on the hub. So the rotors arent interchangeable but the whole assembly is.

[Houser450]

Ok so what sizes are the discs I have a disc that the bolt pattern lines up with the hub. By the way this is for sale as soon as I figure what its for
Thanks

[hondaREX]

EX rotor measures in the neighborhood of 8-3/4, 250r rotor is in the neighborhood of 7-1/4. Let us know what size it is.

[Houser450]

well if those measurements are correct then its for a 250r. Does anybody here want one $50 with the disc

[Houser450]

one more, thanks for the help guys

[hondaREX]

How good of shape is the disc in? Is it worn much? In other words, is the outer lip the same thickness as the middle of the pad area?

[Houser450]

it looks to be straight, but it is thinner in the middle of the disc