WTB 250r stock locknut/sleeve

[2001-400ex'er]

In need of a 250r axle locknut and the threaded sleeve. PM me with info/shipped price. Thanks guys

I'm experimenting with putting a 250r axle on my 400ex and I'm not sure if I need a stock 250r locknut or an antifade. If you have either please let me know.

[Baileygunns]

I know the 400ex and the 450r are the same... If the 250r is the same as those, I have one, $25 shipped

[2001-400ex'er]

Originally posted by Baileygunns
I know the 400ex and the 450r are the same... If the 250r is the same as those, I have one, $25 shipped

Thanks but I guess the 250r one is a little longer than the 400/450 locknut.

[2001-400ex'er]

After doing some more research, I guess I'll be looking for stock or aftermarket, so please help me out if you have an old one laying around.

[426kidz]

aftermarket wont work trust me been there done that. aftermarket lsr anti fade didnt fit correctly... there is a stock one on ebay for 5.00

[hondaREX]

I have a durablue axle so it may be what makes it all different but my 250r durablue axle with a 250r durablue anti fade, and it all worked with the EX carrier. I will be running an EX axle for the width, with an EX carrier, a 250r stock brake hub with a 250r/400ex durablue locknut.

I will try to put a stock EX brake hub with a 250r and 400ex locknut tomorrow. I dug up my 250r locknut to compare them as well. I will post what i find tomorrow.

[2001-400ex'er]

Originally posted by hondaREX
I have a durablue axle so it may be what makes it all different but my 250r durablue axle with a 250r durablue anti fade, and it all worked with the EX carrier. I will be running an EX axle for the width, with an EX carrier, a 250r stock brake hub with a 250r/400ex durablue locknut.

I will try to put a stock EX brake hub with a 250r and 400ex locknut tomorrow. I dug up my 250r locknut to compare them as well. I will post what i find tomorrow.

Thanks for the help. I did order a 250r LSR antifade today so I'm going to try that once it comes in and if it doesn't work I guess I'll just sell it and find a stock one.

[danhung11]

I have a nice rezinced lock nut and rotor hub if you still need one. It spins freely and has the Allen set screw.

http://i223.photobucket.com/albums/dd228/danhung11/DSC01541.jpg