couple quick questions

[racer82]

i have a 2007 trx 450er that i want to put a kicker on. i have the shaft that the kcicker goes on and the gears and springs. will i need any thing else other than that one shaft and those gears? thank you.

[Scro]

You'll need quite a bit more. You can find the list here.

http://exriders.com/vbb/showthread.php?s=&threadid=418017.

This is might also be some useful info:

If you buy a complete 04/05 kickstart assembly, there are several parts that will need to be updated with the 07 counterparts to add the kicker to the 06+ electric start. These parts are:

28233-HP1-840 - Gear retainer plate
28251-HP1-840 - Kickstart spindle
28261-HP1-840 - Spring
28232-HP1-840 - Spring collar
15201-HP1-600 - Oil guide plate

The rest of the gears and parts from the 04/05 kickstart assembly will work.

More than likely, if you buy a used 04/05 kicker assembly it's not going include the bearings for the cases. These part numbers are:

91105-KN7-671
91007-HP1-671

The actual kick lever from an 04/05 will work on 06+, but the lever will scrub the plastic a little. You will need to buy the 06+ kick lever if you want it to fit correctly in the plastic: 28300-HP1-840

[Scro]

Keep in mind that info is from around 2009. So I would pay attention for part numbers that might be updated/cancelled.

[racer82]

thanks man. i would like to find a used one on here so off to the wanted sections i go haha