yfzracer101
12-13-2012, 02:16 PM
Ok guys im thinking about make the switch to the dark side(honda) for next season. THis is my race bike I rode part of the 2012 season (due to injury) The crank, cyclinder, valves, seats, piston, were all new this year, and the bike was just went through and had all the bearing replace, new piston rings, right before LL. Since then ive only rode the bike 3 times. Im asking $7500 obo. 812-457-6105 You and call or text me. I work 3rd shift so If i dont anwser or respond right away Im probably sleeping Ill ill get back to you that night or the next day
Would be willing to work out a deal for a 06+ 450r. Either complete stock low hour one +$$$$ or one with about the same done to it.
Motor Specs:
Head: TMM Port work, and oversize valves
Cams: TMM Specs
Piston: 14 to 1 TMM spec CP.
Air Filter: TMM Oversize filter adaptor with K&N
Crank: Falcon Crank and rod
Trany: Billet 3rd gears
-Kicker stater
-43mm FCR Carb
-FMF 4.1 Exhaust
-13/36 gearing
-Lonestar DC Pro A-arms
-Fox Flots w/kashima coat
-Rear Poduim single rate with DLC shaft
-LSR Pro axle
-DWT Wheels and tires
-Precision
-Rath Nerfs, bumber, and grab bar
-Streamline brake lines
-450r throttle and front master cyclinder
Would be willing to work out a deal for a 06+ 450r. Either complete stock low hour one +$$$$ or one with about the same done to it.
Motor Specs:
Head: TMM Port work, and oversize valves
Cams: TMM Specs
Piston: 14 to 1 TMM spec CP.
Air Filter: TMM Oversize filter adaptor with K&N
Crank: Falcon Crank and rod
Trany: Billet 3rd gears
-Kicker stater
-43mm FCR Carb
-FMF 4.1 Exhaust
-13/36 gearing
-Lonestar DC Pro A-arms
-Fox Flots w/kashima coat
-Rear Poduim single rate with DLC shaft
-LSR Pro axle
-DWT Wheels and tires
-Precision
-Rath Nerfs, bumber, and grab bar
-Streamline brake lines
-450r throttle and front master cyclinder