NUNZI 534
12-10-2012, 12:23 PM
Quad was a electric start, has been converted to kicker
Frame and subframe powder coated silver vine, bare gusset kit professionally tig welded(some gussets left out in order to mount steering stabilizer ect dose not come with steering stabilzer), also added couple custom guessets. Finished factory welds where needed.
Frame was replaced beginning of 2011 with real nice low hour stock frame. only has 20 hours on this frame and subframe since powder coating. NO CRACKS very nice well taken care of. Clean title in hand. In my name!!
Motor has all new bearings, seals, stock piston and rings, clutch fibres, GTT shifter spring, some trans gears and thrust washers, shift drum center , head was just gone through new valve stem seals, all has 6 hours MAX since rebuild. crank has 20 hours max on it. Well maintained. Very strong and fast. starts first kick, runs great!!!
Duncan Fat boy 4 full exhaust, green wire pin pulled out of CDI connector, (not cut) to do green wire mod(same as HRC mod),
stock 08 carb with hot start(Duncan mods to carb), pro design intake ring and oversized UNI air filter.
TAG T2 cr high bars, pro design kill switch, works connection clutch lever w/hot start, new spider A3 grips, gray and black power MADD hand guards w/bracket, duncan seat cover and grafix
IMS Roll 06+pegs w/kick up, IMS Roll heal guards, custom Ac nerf bars, PRM baja rear grab bar, IMS ROLL front bumper, Razor 2 front 21x7x10, razor 1 rear 20x11x9 good tread!!
Suspention and wheels are stock. Black fenders, nice strong low hour quad!!
pics soon to come asking $3995.00 obo. comes with 4 gallons of fuel w/can and one extra UNI air filter!!
text or call for more details
859-494-460eight
located in Lexington KY
Thanks,
Jesse
Frame and subframe powder coated silver vine, bare gusset kit professionally tig welded(some gussets left out in order to mount steering stabilizer ect dose not come with steering stabilzer), also added couple custom guessets. Finished factory welds where needed.
Frame was replaced beginning of 2011 with real nice low hour stock frame. only has 20 hours on this frame and subframe since powder coating. NO CRACKS very nice well taken care of. Clean title in hand. In my name!!
Motor has all new bearings, seals, stock piston and rings, clutch fibres, GTT shifter spring, some trans gears and thrust washers, shift drum center , head was just gone through new valve stem seals, all has 6 hours MAX since rebuild. crank has 20 hours max on it. Well maintained. Very strong and fast. starts first kick, runs great!!!
Duncan Fat boy 4 full exhaust, green wire pin pulled out of CDI connector, (not cut) to do green wire mod(same as HRC mod),
stock 08 carb with hot start(Duncan mods to carb), pro design intake ring and oversized UNI air filter.
TAG T2 cr high bars, pro design kill switch, works connection clutch lever w/hot start, new spider A3 grips, gray and black power MADD hand guards w/bracket, duncan seat cover and grafix
IMS Roll 06+pegs w/kick up, IMS Roll heal guards, custom Ac nerf bars, PRM baja rear grab bar, IMS ROLL front bumper, Razor 2 front 21x7x10, razor 1 rear 20x11x9 good tread!!
Suspention and wheels are stock. Black fenders, nice strong low hour quad!!
pics soon to come asking $3995.00 obo. comes with 4 gallons of fuel w/can and one extra UNI air filter!!
text or call for more details
859-494-460eight
located in Lexington KY
Thanks,
Jesse