300EX Partout !!

[f4istunna]

Parted out a few 300ex the past cpl months. Heres whats left


1998 300ex


Stock front bumper 10
both spindles 20
complete front brakes, master cylinder calipers, lines 30

one rear wheel hub with no studs 10
chain and sprocket set 20
rear shock 20
swingarm 20
airbox with lid and all tubes/hoses 10 no filter


wiring harness with cdi, coil, rectifier etc 40

steering stem bent back 5
front fender bracket 5
clutch lever with cable 10
gas tank with cap and petcock valve 20
footpegs 5

front sprocket cover/guard 10
frame 40 no title

engine
200 for head, cam and rocker cover
80 for jug/piston good
30 clutch
30 stator and cover
oil pump 10
timing chain, guides and tensioner good 10


2001

Complete oem clutch good $30
Clutch cover $10
Stator with cover $30
Complete bottom end no cracks or leaks, crank and bearings look/feel good but countershaft has some wear where sprocket bolts up $80
flywheel / starter clutch and all starter gears 30
stock cam with sprocket 25

stock rear shock 20
Frame straight no cracks or repairs 40 no title

Complete wiring harness with cdi, rectifier, etc, power wire to battery isnt factory but works fine 30

carb missing plastic side cover 10
clutch lever / perch and cable 10
front fender bracket/mount 10


2000 300ex

stator with cover 20 (plug for stator has a peice of plastic broken still works fine0
clutch cover 10

starter cover and gears 10
shifter lever with reverse 5
footpegs 5
2 rubber grommets for seat (rear)
rubber intake tubes, valve adjuster caps,

front brake calipers 10
front master cylinder and lever 20

airbox with filter, intake tube, and lid (small holes drilled in lid)) 10
clutch lever / cable 10
Stock steering stem slightly bent at top still useable 5
battery box / bracket $10

[f4istunna]

dont like prices feel free to make offer

[f4istunna]

rockerbox, axle and rear wheel hubs sold...

[f4istunna]

sold a few things. list at beginning of page is updated with whats left

[799 dad]

do you have any plastic?

[f4istunna]

just have whats on list, no plastic

[f4istunna]

did some cleaning and found a cpl more things to add to list...

[nick28_89]

hey i'm looking for a good 2001 300ex rear carrier. please let me know if you have one available text me any time at 618-309-122nine thanx-
nick

[f4istunna]

gave my buddy the carrier for his 250x sorry.

[f4istunna]

updated the list got another 300ex in a trade deal im parting out. Sold a few things already but if its on the list at beginning of post then i still have it...

[f4istunna]

sold several things today list is updated...

[conky16858]

does the starter switch work on the headlight switch if it does how much shipped to 16858 PA
also do you happen to have a rear skid plate

[f4istunna]

no skid. ya starter button works fine. The headlight switch wires were tapped into from prev owner because he ran foglights into the wiring but the switch assembly / housing is all there and intact. no more than $30 shipped. probably more like 25 or so

[f4istunna]

extended axle, swingarm and carrier and cpl other parts sold over weekend. List is updated with whats left

[f4istunna]

sold a cpl parts list at beginning page 1 is updated

[f4istunna]

sold plastics, rear brakes, and gas tank List updated

[LeGaCyGiAnT124]

You have a PM.

[Hult250R]

Pm sent on front shocks

[f4istunna]

pms sent back to you guys. sorry for delay havent been on in few days

[f4istunna]

sold a few more things list at the beginning is updated as of today with what i have left

[laxman1306]

need a front rim no tire...how much?

[f4istunna]

dont have a front rim bud sorry just whats on the list

[8ball]

Do you still have front shocks? If so could you please email me pic's of both sets, eightball1974@hotmail.com.
Thanks

[f4istunna]

ya still have them, had a guy here say he wanted them along with other parts but havent heard back from him in days so...

Email on the way

[Troyer23J]

Hey man, your PM box is full. Anyway, sorry for the delay but money has been sent now.

Thanks.

[f4istunna]

just cleared inbox sorry, got your payment

front shocks
spindles
front brakes
and front hubs are sold

list updated.

[f4istunna]

got another 300ex to partout list on page 1 is updated with what i have as of today

[LeGaCyGiAnT124]

I am interested in the axle. Do you have rear hubs with studs too? Send me a PM back with your number and we can meet up in the next week or so. Thanks.

-Brandon

[f4istunna]

i have hubs but only ones i have left will need new studs put in them I have the axle

[f4istunna]

sold several parts yesterday page 1 list updated as of 3-13

[tyler70t]

pm sent

[f4istunna]

wheels, nerfs and cpl other parts are sold. List updated on page one as of 3-17 with whats left

[f4istunna]

sold another one of the bottom ends and cpl other things updated the list...

[TheRealFatShady]

Have any carbs left? Price shipped? Thanks

[f4istunna]

got one carb left thats missing the plastic side cover but a guy locally is supposed to come for it tomorrow, if he doesnt show i can ship to ya for 27-30$

[TheRealFatShady]

Alright let me know if it sells locally please. If it does, no worries.

Do you happen to have just a cam plug and the little bracket that holds it? And any top end bolts for the valve cover?

[f4istunna]

ya i should have those, i know i have the bolts. Ill look for the plug

[LeGaCyGiAnT124]

Hey man I just sent you a text about the one way starter clutch. I need it for my girlfriend's bike. Let me know if you still have it, thanks!!

[TheRealFatShady]

Let me know if you find any of the bolts. And a price.

[f4istunna]

i have alot of bolts, do you need the long m6 (8mm head) bolts that hold rocker cover on?, cylinder head bolts? what exactly do you need?