Arens frame

[twink07]

Need some help motor not Alining up :(( 06 motor

[ryanowarrior]

Where is it not lining up? Frame may be made for 02-03 motors which are different than an 06 motor

[twink07]

I got the motor in the frame and everything but the rear sprocket don't line up unless I put a nut between the sprocket and hub on axle !!!

[ryanowarrior]

Dunno bout that one..something deff off in swing arm or rear end..

[twink07]

Feel free to text me and I'll send u pix. 740-441-5622

[chopp124]

ill bet u have same problem i had. the carrier i first tried had the single rear bearing deal in it wich was causing my hub to be about 3/8 closer to the carier. i swithed back to the double row bearings and that movers your hubs back out 3/8 inch on both sizes and fixed my alignment. other wise u can trim swing arm to get alignment right

[chopp124]

may have been closer to 1/4 inch not sure