Log in

View Full Version : How to adjust RPM Axle?


Cole
03-12-2003, 06:22 PM
I got it in the mail today. How do I adjust it out to plus 4 inches?
racerx573
03-12-2003, 06:23 PM
Should be 2 spacers on each end on the splines: a big one and a small one. Put both of them on the inside of the wheel hub.
Ex'r Marlin
03-12-2003, 06:59 PM
Originally posted by racerx573
Should be 2 spacers on each end on the splines: a big one and a small one. Put both of them on the inside of the wheel hub. Ditto. :) Let us know if it worked out for ya!
MOUSE
03-12-2003, 07:35 PM
got mine yesterday from c&d and im very happy with mine only problem i had was getting my stock axel nut off. and my hubs slid right off the stock axel but to get them on the rpm i had to use the rubber mallet and some grease but all else was fine
Razorback
03-12-2003, 07:42 PM
Originally posted by MOUSE
got mine yesterday from c&d and im very happy with mine only problem i had was getting my stock axel nut off. and my hubs slid right off the stock axel but to get them on the rpm i had to use the rubber mallet and some grease but all else was fine

I had to do the same thing to one side of my LSR axle. I think they tend to get a little too much of the chrome into the splines and the fit is tight because of it.
OutlawEX
03-13-2003, 03:14 PM
Originally posted by racerx573
Should be 2 spacers on each end on the splines: a big one and a small one. Put both of them on the inside of the wheel hub.
toomeyshee87
03-13-2003, 07:17 PM
so which is better? lonestar or rpm? i got a lonestar
trx400ex
03-13-2003, 07:21 PM
rpm is the best by far
toomeyshee87
03-13-2003, 07:23 PM
why is that? they both got warrenties, i got mine for $317 shipped
Dave400ex
03-13-2003, 07:25 PM
The RPM is just known and proven to be stronger at the MX races. Plus most of the top guys use them...
RiPPiNiTuP7
03-13-2003, 07:34 PM
Originally posted by WarriorMan
The RPM is just known and proven to be stronger at the MX races. Plus most of the top guys use them...

:D ;)
trx400ex
03-13-2003, 07:39 PM
well dont worry, lsr will work alright, i already have one, and im getting another...they both have warrenties, so no need to sweat....lsr looks even better now that RPM raised there prices 40$
toomeyshee87
03-13-2003, 07:40 PM
ya i like mine
trx400ex
03-13-2003, 07:43 PM
btw whered you get it for 317!?
toomeyshee87
03-13-2003, 07:46 PM
i knew you would ask:D i got it from a dealer that puts em up on ebay. they usually go pretty high so i just asked him if he would take 300 and he said ya then it was 17 bucks for shipping:cool:
trx400ex
03-13-2003, 07:52 PM
yeah, i was bidding on a few diff. ones on ebay untill they got up to like 340 i can get one from a shop for 330....probably go through c+d, thanks though
ieatglue
03-17-2003, 12:18 PM
Originally posted by trx400ex
well dont worry, lsr will work alright, i already have one, and im getting another...they both have warrenties, so no need to sweat....lsr looks even better now that RPM raised there prices 40$



good luck getting lsr to stand behind their warrenty.