PDA

View Full Version : I'm confused


fmf400ex
03-12-2003, 12:42 PM
Ok this may be kind of a dumb question, but I am not sure. Anyways I have some douglous rims and my wheels were stuck on. SO after I got them off, I was told that the nut was on the wrong way(the curved end was against the rim). So one person told me too put the flat end against the rim. So which way is the right way for some douglous rims.
remlapr
03-12-2003, 12:46 PM
There are different nuts that have a flat flange on the back for use with aftermarket rims, or you can just flip the stock ones over and use washer I think...
TEAM OUTLAW#22
03-12-2003, 12:48 PM
Yeah, I just flipped the nut over to the flatside and i haven't had any troubles yets
fmf400ex
03-12-2003, 12:49 PM
ok you mean the rounded side and a washer, or the flat side and a washer?
Taco
03-12-2003, 12:50 PM
flat side and the washer
fmf400ex
03-12-2003, 12:51 PM
ok thanks outlaw
AtvMxRider
03-12-2003, 01:46 PM
Originally posted by Taco
flat side and the washer
speedy400
03-12-2003, 02:06 PM
I had the same problem, I just reamed out the holes to where the holes were as bag as the stockers and put the rounded side in 1st, I've had no problms.
fmf400ex
03-12-2003, 02:49 PM
Ok thanks a lot guys. That was a big help.
fmf400ex
03-12-2003, 02:58 PM
Ok thanks a lot guys. That was a big help.