Anyone selling air shrouds?! Need some!! few questions too

[HondaRacing83]

i really need some air shrouds cash in hand so if anyone has any text me 8147952038. also, right now my jetting is 42 pilot 152 main with a slip on, uni filter and lid on. if i grind my header welds will i need to rejet? also, whats the benefits of header wrap?

[HondaRacing83]

also will 250r air scoops fit?

[buck440]

if your talking about the plastic hood scoop than yes it will fit a 400ex. it's what i had

[HondaRacing83]

No not a hood, air shrouds

[russellsroost31]

no u shld not have to rejet for grinding header welds

[duneslider]

Originally posted by russellsroost31
no u shld not have to rejet for grinding header welds

This isn't necessarily true, you may have to go up a hair on your main by grinding the weld. It is one of those maybe, maybe not things. It will slightly increase flow so it could cause a slightly lean condition. If you are jetted pretty fat now you should be fine but if you are jetted lean you may need to bump up a size.

[hondaREX]

250R shrouds work great. They mount up kinda ghetto but thats just how i did mine. I used zipties and cut a small notch to clear the front fender bracket on each side. They look gd and arent out of place. Ive had no problems with then yet and they def do help direct air over the motor and through the cooler. If you find them cheap for a 250r, get them.

[HondaRacing83]

Originally posted by hondaREX
250R shrouds work great. They mount up kinda ghetto but thats just how i did mine. I used zipties and cut a small notch to clear the front fender bracket on each side. They look gd and arent out of place. Ive had no problems with then yet and they def do help direct air over the motor and through the cooler. If you find them cheap for a 250r, get them. do you have pictures?

[hondaREX]

I will post some soon. Ive been asked a couple times now and i never have the time. Ill try to get them up 2day.

[hondaREX]

Heres a pic of the 250r shrouds on my 400ex.

[hondaREX]

Here is how i mounted them and the notch i cut.

[hondaREX]

Upper mount

[hondaREX]

Lower mounts