PDA

View Full Version : +2 standard travel leager a-arms



z400bs
11-10-2012, 01:30 PM
I have a set of red +2 standard travel leager a-arms for an 06+ honda. Ball joints and bushings are good. Comes with ti rods. One a-arm has a very slight bend in it but is hardly noticeable and still lines up and works fine. These have been well used so paint is chipped.

$250 OBO

434-989-4789 text or call

z400bs
11-11-2012, 07:54 PM
bump

z400bs
11-12-2012, 05:24 PM
bump

z400bs
11-13-2012, 11:19 AM
Bump

z400bs
11-15-2012, 11:18 AM
These need to go!

skippy1999
11-15-2012, 03:54 PM
which arm is bent?

z400bs
11-15-2012, 07:54 PM
The bottom right. But you can barely tell unless your really comparing the two sides. I just wanted to be honest for the person that buys them. It could probably be easily straightened. Rode mx with it like that for around 2 years or so and never gave me a problem at all.

If you would like I could try to get a picture showing how small it really is.

z400bs
11-18-2012, 10:07 PM
bump.

z400bs
11-20-2012, 11:12 AM
This picture shows the difference a little better. If you look at the bottom arm on the right side, you can see the slight curve compared to the other side.

These a-arms are still strong and work absolutely fine.

z400bs
11-22-2012, 06:19 PM
sold!