woodsracer188
11-08-2012, 11:57 AM
Have a mess of parts i'm trying to unload along with parting out my honda 450...
05 trx450r:
Complete motor roughly 6 hours on top end , bottom end was rebuild in spring with new oem crank , bearings , seals , everything. CP 12.5:1 piston , ported head , HRC cam, rekluse-$1300
Elka stage 4 Long Travel front shocks with Lonestar XC +.5" long travel a arms, shocks were done by JET suspension-Shocks need lower shock bushings.-$1000
Rear shock Standard travel , dual rate springs , shock was done by JET suspension-$100
GT thunder XC link-$100
Frame-Powdercoated but worn in spots , no cracks , welds-$200
Steel Braided front brake lines-$25
Houser pro bounce XC nerfs, need nets , good condition-$150
Houser Steering stem +1 with 1 1/8" antivibe clamp-$150
Fasst co flexx bars-$200
DWT front beadlocks 4-1 offest , rear ITP? beadlocks with good tires (Holeshot GNCC front , Razr Rears)-$350
HMF slipon-$60
Pro Armor bullhorn front bumper-$50
Precision steering stabilizer-$200
Houser long travel a arms , Fox Shox long travel (all 3) with rear link-$1900
Clarke oversize tank-$100
Fluidyne Radiator , no leaks or anything-$150
OEM axle
04/05 spindles/hubs-$125
OEM subframe , lowered-$65
06+ OEM crank 2 hours on it!-$125
Stock front shocks-$130
oil cooler-$25
Oil pump-$25
06+cylinder standard bore w/ CP 13:1 piston-$125
06+ one way start clutch kit-$175 BRAND NEW
400ex steering stem-$50
yfz450 (05) stator-$50
Kasea 90 part out or sell as whole...motor runs .. Purchased off my brother when it was all apart. got it home and noticed parts were missing. MOTOR DOES RUN! My brother tore it down to get the frame powdercoated while he sent out ANOTHER motor to get built. Stock motor is in it , you could purchase some things , finish it yourself OR use it for parts? or buy parts...
Frame is powdercoated black
Stock engine-has been rebuilt though
Hetrick full racing exhaust
I have 3-4 wiring harnesses
Green Aftermarket plastics($400 new! no rides on them , a couple little scratches from sitting in the garage!)
2 carbs
Many different CDI's , coils etc. Aftermarket & OEM
Spare motor needs to be put together.. Has a stroker crank (already installed in the bottom end) , Hetrick cylinder and Head also piston.
I have a BUNCH of parts for this thing. The spare motor is actually an Apex 90 motor!! These things are pretty much the same except air cooled/liquid cooled and a couple other little things.
I was building it for my daughter but too much going on right now so everything is for sale!
I'm sure i'm forgetting a lot of parts...
05 trx450r:
Complete motor roughly 6 hours on top end , bottom end was rebuild in spring with new oem crank , bearings , seals , everything. CP 12.5:1 piston , ported head , HRC cam, rekluse-$1300
Elka stage 4 Long Travel front shocks with Lonestar XC +.5" long travel a arms, shocks were done by JET suspension-Shocks need lower shock bushings.-$1000
Rear shock Standard travel , dual rate springs , shock was done by JET suspension-$100
GT thunder XC link-$100
Frame-Powdercoated but worn in spots , no cracks , welds-$200
Steel Braided front brake lines-$25
Houser pro bounce XC nerfs, need nets , good condition-$150
Houser Steering stem +1 with 1 1/8" antivibe clamp-$150
Fasst co flexx bars-$200
DWT front beadlocks 4-1 offest , rear ITP? beadlocks with good tires (Holeshot GNCC front , Razr Rears)-$350
HMF slipon-$60
Pro Armor bullhorn front bumper-$50
Precision steering stabilizer-$200
Houser long travel a arms , Fox Shox long travel (all 3) with rear link-$1900
Clarke oversize tank-$100
Fluidyne Radiator , no leaks or anything-$150
OEM axle
04/05 spindles/hubs-$125
OEM subframe , lowered-$65
06+ OEM crank 2 hours on it!-$125
Stock front shocks-$130
oil cooler-$25
Oil pump-$25
06+cylinder standard bore w/ CP 13:1 piston-$125
06+ one way start clutch kit-$175 BRAND NEW
400ex steering stem-$50
yfz450 (05) stator-$50
Kasea 90 part out or sell as whole...motor runs .. Purchased off my brother when it was all apart. got it home and noticed parts were missing. MOTOR DOES RUN! My brother tore it down to get the frame powdercoated while he sent out ANOTHER motor to get built. Stock motor is in it , you could purchase some things , finish it yourself OR use it for parts? or buy parts...
Frame is powdercoated black
Stock engine-has been rebuilt though
Hetrick full racing exhaust
I have 3-4 wiring harnesses
Green Aftermarket plastics($400 new! no rides on them , a couple little scratches from sitting in the garage!)
2 carbs
Many different CDI's , coils etc. Aftermarket & OEM
Spare motor needs to be put together.. Has a stroker crank (already installed in the bottom end) , Hetrick cylinder and Head also piston.
I have a BUNCH of parts for this thing. The spare motor is actually an Apex 90 motor!! These things are pretty much the same except air cooled/liquid cooled and a couple other little things.
I was building it for my daughter but too much going on right now so everything is for sale!
I'm sure i'm forgetting a lot of parts...