88 Stock Parts

[Burns310r]

Basically an 88 roller i tore down to restore and lost interest. I bought this bike on craigslist, so i have no history on it.

Shipping not included.

Frame $150. Frame has a crack in the rear motor mount tab, easy weld. Not the frame it self.

A-Arms/spindles$50
Swing Arm $50 has been repaired.
Front Shocks $40
Rear Shocks $40
Front/brakes $70
axle $40
bearing carrier $45
steering stem $30 needs a tap run on the thread, freshly painted blue
radiator $30
airbox $10
front/rear hubs $25
linkage, $25
scoops $10
handle bars
FMF Fatty Pipe $25 no head section
Power Core Silencer $25 has hole that can be fixed
Seat $60 seat pan/foam apear to be good, the cover is shot.
Gas Tank $40 was painted black
PRM swing arm skid plate $50 scraped up from normal use. Still useable.

[Burns310r]

http://i158.photobucket.com/albums/t82/BurnsMGT/photobucket-1075-1352296508893.jpg

[Twhite]

how much for the whole roller

[Burns310r]

Id let it all go for 500. There maybe some bolts missing, i have most of the main ones there. Pivot, A-arm, steering what not should all still be there.

[Twhite]

are there any cracks or repairs in the frame

[Burns310r]

Just the one mentiond on the rear engine mount tab. Its not the frame itself, just the thin metal tab. Would be an easy fix. The frame has had some minor reinforcing done to it.

Personally i like people to look at the frames in person so they know what they are getting. Are you in iowa?