jrns281
10-31-2012, 08:26 PM
Hi Guys,
I recently finished my first top & Bottom end on my son's Eton Viper 90. I got everything installed and ready to fire it and it will just crank very slowly and not enough to turn the motor over. I did increase the bore to a 52mm. The bike has a Hetrick Racing Gen II Pipe and thats about it for mods. I tried to jump it via a portable insta-jumpers and still it had no increase in the motor turning over. Everything worked before I did the rebuild and never had problems with the starter/solenoid. The bike is a 2005 without Reverse.
I would certainly appreciate any advice or expertise you guys can give me. I have appreciated all the past advice and know this is a great site for mini's.
Currently the battery is 12.5 volts on it and is a battery that comes stock on the bike (80 CCA).
Thanks Guys in advance
I recently finished my first top & Bottom end on my son's Eton Viper 90. I got everything installed and ready to fire it and it will just crank very slowly and not enough to turn the motor over. I did increase the bore to a 52mm. The bike has a Hetrick Racing Gen II Pipe and thats about it for mods. I tried to jump it via a portable insta-jumpers and still it had no increase in the motor turning over. Everything worked before I did the rebuild and never had problems with the starter/solenoid. The bike is a 2005 without Reverse.
I would certainly appreciate any advice or expertise you guys can give me. I have appreciated all the past advice and know this is a great site for mini's.
Currently the battery is 12.5 volts on it and is a battery that comes stock on the bike (80 CCA).
Thanks Guys in advance