bcleveland
10-28-2012, 02:22 PM
Hey fellows I am having a problem Yesterday I was doing some easy riding with the nephew 2nd gear barely cruising, and the hose come off on top of the rocker box and started blowing oil every where. I immediately shut it off we pulled it back to the truck and started it again to see where it was coming from we ran it for just a couple of seconds it was blowing a stream out of the fitting on top so cut it off. This morning I stripped all the body work off and fixed the hose then pressure washed all the oil off. Went to start it to let it dry and it wouldnt do anything but spin over. No pop no stumble no crazy bangs. I pulled the plug and was wet with gas so I put a new plug in and nothing same problem. So I thought since I had stood it up on the grab bar the float could have hung and was flooding the crap out of it. So took the carb apart and everything was spotless nothing blocked float nice and free. Put it back on pulled plug and spun it over with the plug stuck in the wire and grounded out and has a nice blue spark. Tried it again spins over but no pop bang or anything. So here is where I am at
It is getting fuel
It is getting a spark
It has compression havent checked it with a gauge but does have atleast some.
So where do I go from here It was running fine when I cut it off yesterday.
Could it be the cdi got killed from the pressure washer?
It is getting fuel
It is getting a spark
It has compression havent checked it with a gauge but does have atleast some.
So where do I go from here It was running fine when I cut it off yesterday.
Could it be the cdi got killed from the pressure washer?