PDA

View Full Version : 3rd gear



jamesrair
10-22-2012, 06:34 PM
doe's anyone know why the 3rd gear goes bad and what exactly happens , what needs to be replaced?

tg413
10-23-2012, 06:48 AM
here is a link to a video where they explain it all, awesome clip with great info........

Click here (http://www.youtube.com/watch?v=56vzXmf8ICU)

jamesrair
10-23-2012, 08:07 AM
thank u

jamesrair
10-23-2012, 08:20 AM
thanks but that link was about the shift pin relocater not 3rd gear.

Baracudaaa
10-24-2012, 05:27 PM
depending on your year and riding stile, they go bad because you tend to use 3rd gear the most, and the cogs are considered small. I have an '06 and they lasted over 4 years. I could have ran them more, but there started to chip, and I had the case apart, so I replace both 3rd gears in the tranny. You can get a stock set for about $100 I think?
I know that I can run most MX tracks and either lug or over rev 3rd gear and not shift as much, but it stresses the gear out.