axle question!!! please look and respond with your imput

[400exmxracer]

So I'm planning on buying a lonestar +4 axle from a guy that is just the axle and nothing else, I was wondering if I needed anything else for it, or will it just go in without an issue with the stock parts, bearings, etc.?

[400exmxracer]

I meant *input in the title:-)

[b0rn c0nfused]

Well you'll need a sprocket and sprocket hub. I don't know if stock sprocket hub will fit or not.

[400exmxracer]

Forgot to say it has one. Anything else ill need

[Stickman400]

As long as it has the sprocket hub and the hub spacers and you're 400 is ridable right now then you'll have everything you need.

[dxcody]

Yeah, you are good to go.

The stock hubs will fit.
The stock axle nut should fit.
The rotor hub will fit.
The bearing carrier will fit.

That is all there is to the axle.. You are good.

HOWEVER.. you MIGHT need the axle END nuts..

I know on a Durablue they are different, but i do not know about Lonestar... I'll tell rohr to check this thread out..

He has a LSR axle I think.

[400exmxracer]

Thats who I'm buying it off of:-). He said he thouht it would, and I just wanted to double check