Bwr built 330 la sleeve ct cylinder NO port work WITH ricky stator lights DEAL!$1600

[beerock]

this motor has powedcoated super mirror black cases as well as bored for the 330 cylinder. has a hinson clutch basket 89 update and a super mirror black quick change clutch cover with a oem honda quick change cover which is not on it in the pics because i was going to ell it separate. it IS INCLUDED IN THE SALE

this motor pulls by 350 PV because the 330 is the best ratio of piston mass and revs out further then a 350 pv

60 hours on motor with fresh bottom end
motor coems with
oem honda cdi,
ricky stator stator,
ricky stator rectifier,
lightened flywheel,
clutch cable,
39mm keihn carb jetted at sea level
Oem honda switch for on off and lights

ricky stator light clamp bar with billit head lights(has a small bend in the light bolt) and the covers (red) for the lights


this motor is ready to bolt in with lights and kick over and go ride at night or day.

motor with black cases

http://i35.photobucket.com/albums/d194/beerock69/me%20pics/bwr%20parts/IMG_3686.jpg

http://i35.photobucket.com/albums/d194/beerock69/me%20pics/bwr%20parts/IMG_3687.jpg

http://i35.photobucket.com/albums/d194/beerock69/me%20pics/bwr%20parts/IMG_3688.jpg

http://i35.photobucket.com/albums/d194/beerock69/me%20pics/bwr%20parts/IMG_3689.jpg

http://i35.photobucket.com/albums/d194/beerock69/me%20pics/bwr%20parts/IMG_3690.jpg

http://i35.photobucket.com/albums/d194/beerock69/me%20pics/bwr%20parts/IMG_3637.jpg

http://i35.photobucket.com/albums/d194/beerock69/me%20pics/bwr%20parts/IMG_3633.jpg
I have the light to swap out for the bad bulb
http://i35.photobucket.com/albums/d194/beerock69/me%20pics/bwr%20parts/IMG_3635.jpg

http://i35.photobucket.com/albums/d194/beerock69/me%20pics/bwr%20parts/IMG_3647.jpg

http://i35.photobucket.com/albums/d194/beerock69/me%20pics/bwr%20parts/IMG_3648.jpg

http://i35.photobucket.com/albums/d194/beerock69/me%20pics/bwr%20parts/IMG_3649.jpg

http://i35.photobucket.com/albums/d194/beerock69/me%20pics/bwr%20parts/IMG_3651.jpg

[blueball]

is it a nikaseal cylinder or a boreable one,how many bores left

[beerock]

next bore will be a true 330 (I think thats the last bore depending on how thin you want the cylinder to be. resleeving doesnt cost much though. but yes it has one some bores left

[beerock]

here are pics of everything

http://s35.photobucket.com/albums/d194/beerock69/me%20pics/bwr%20parts/?start=all

[beerock]

added pic and added a quick change clutch cover to the sale same price