2006 Blaster Part Out

[GetOut&Ride]

Have a 2006 blaster that I'm starting to disassemble/part out.

Any/everything is considered up for sale with the exception of the frame.

The stock motor (with improved SST pipe) had the piston skirt break so it is also up for sale (will let go cheap, but complete, as not planning on disassembling).

Let me know if there are any parts of interest you want to offer on, otherwise I'll start to dissemble, take pictures and start posting pieces for sale out here on EX and EBay.

[GetOut&Ride]

Full FMF exhaust, like new with just the start of some blue'ing at neck of head pipe... $200 shipped

[GetOut&Ride]

Complete Stock Exhaust in good shape (still black, head pipe just has some mud/dirt baked to it)... $75 shipped

[GetOut&Ride]

Full set of blue OEM plastic in good condition (no breaks/cracks but does have some white stress discoloration on few edges)

If you buy the full set I'll sell it all for $150 shipped (probably going to cost me close to $50 to ship due to large sized box that will be required for that rear section)... just trying to get $100 out of all of it.

Don't want to start selling off various pieces yet... unless there is no interest in entire set.

[GetOut&Ride]

So I'm going to attach several pics here to show what we are dealing with on this motor... bottom of piston skirt broke off, think all the pieces were reclaimed (I'm not guarenteeing that of course... just trying to be clear/upfront on what happened and what you are looking at) and no signs of anything hurting cylinder or head (will attach several pics to see sidewalls of cylinder, etc).

The motor was stock but even if someone doesn't want to make it whole again there is signficant value in the parts... but I don't realy want to part it all out (too many other coals in the fire right now).

So I want to let it go for a reasonable price, but I also know that shipping is going to be pretty brutal (heavy weight). Probably be something where I'll have to put plywood & cardboard in bottom of a rubbermaid tote, pack old shirts, etc around it... blah blah blah

Guessing it will cost somewhere between $50-100 to ship it (between materials and carrier fees).

So let's see how $250 sits with everyone for everything pictured in this series of pics (with Motor in the Subject line)... I can't sell this for $100 and pay $85 in shipping or I'd be better off to toss it in trash & not pay $4 a gallon to drive it in to post office.

If no takers then I guess I start taking pieces off and start selling in smaller, easier to ship pieces... but again I'd really prefer not to.

[GetOut&Ride]

Motor

[GetOut&Ride]

Motor2

[GetOut&Ride]

Motor3

[GetOut&Ride]

Motor4

[GetOut&Ride]

Motor5

[GetOut&Ride]

Motor6

[GetOut&Ride]

Motor7

[GetOut&Ride]

Motor8

[GetOut&Ride]

Motor9

[GetOut&Ride]

Motor10

[GetOut&Ride]

Sale of motor and electrical/writing harness is pending payment

[GetOut&Ride]

Motor/Wiring is sold... other pieces still for sale as referenced/pictured in this thread.

Will also be posting pics of stock carb (with TORS, etc.) and some of the other pieces.

If you're interested in something here but think I'm off a little on my asking price then shoot me your offer and I'll consider.

[GetOut&Ride]

Pipe, rear tail light, rear grab bar, rear wheels/tires now also sold.

Have everything else other than those pieces (and motor/wiring harness sold previously).

Also now willing to sell frame... will sell it cheap but almost has to be local pickup (Iowa) or you are going to pay me enough to cover shipping charges.

I'll make a list of parts if I have to, but hoping someone sees this and we can hook up on whatever pieces you need.

All reasonable offers considered

[mxdad423]

Do you have a set of nerfs you are selling?

Thanks

[GetOut&Ride]

I do not have any nerfs for sale, but I do have the stock metal foot boards & plastic heel guards.

Will sell them for cost of shipping plus $40 for the set (all four pieces).

I'm having trouble resizing the pictures I took but if you are interested in them get me your email address and I'll send them your way.

[GetOut&Ride]

Got the picture to resize... $40 plus shipping for all pieces pictured here:

[GetOut&Ride]

Finally got a picture of the carb...

Full 2006 OEM carb including handlebar thumb throttle assembly, cable, carb body, TORS (everything pictured)

I see a couple of these sets on eBay listed at $140-180 ... I'll take $120 shipped to someone out here rather than dealing with the eBay folks.

[GetOut&Ride]

2006 OEM Headlight Assembly (working when removed)

$50 shipped

[ww228king]

Got the exhaust in today! Thanks Again! Do you have an axle and hub? Messed his up today trying to get the hub off.

[GetOut&Ride]

2006 OEM front brake lever assembly (with parking brake lever), as pictured

$50 shipped

[GetOut&Ride]

ww228king,

Glad you are happy with the exhaust, thanks for the feedback

"Yes" I have everything from the rear of the quad still ... axle, rear hubs, axle carrier, etc.

Let's take conversation over to email/text message again so we can hook you up with what you need.

[GetOut&Ride]

Front bumper... some light scratches, had a weld repaired previously.

$50 shipped?
(just because it's going to cost me at least $20 to ship in box large enough to fit it)

[GetOut&Ride]

Swing arm guard $35 shipped... has some scratches on underside as well as a few dings/dents, definitely not "like new", but basically selling for $20 + my estimated shipping charges.

Bundle with some other piece and I can work with you on the price further.

[GetOut&Ride]

Here's a picture of the frame but I really don't know how to price this out because I have no idea how bad shipping would be (had a couple surprises lately)...

If it's something you're interested in let's figure out where you are at and how we can get it to you (I could go get a quote from local Pak Mail that can ship via several different carriers).

Basically I'd like to get just about $150 for the frame + shipping charges I'd have incur

[GetOut&Ride]

Bump

[GetOut&Ride]

Here's list of what I still have (and probably forgetting a few things so don't be afraid to ask):

- OEM axle, carrier, sprocket, brake, etc.
- OEM frame
- OEM a-arms
- OEM front hubs/brakes
- OEM shocks
- OEM foot wells (steel)/heel protectors (plastic)
- OEM swingarm
- OEM handlebars
- OEM blue plastic
- OEM headlight
- complete OEM carb/throttle setup (TORS, throttle cable housing, control electronics, etc.)
- OEM hand brake (with parking brake)

I threw out some asking prices in this thread, but if there is something you want shoot me a PM with reasonable offer (just keep in mind some of this stuff gets expensive to ship)