building a rodeo bike need advice

[riggsracin]

building a rodeo bike. already have lowering kit and 450r shocks.
Was thinking about installing a stage 2 magnum cam, fcr, porting the head, high compression piston.
Looking for write up and pics of the lighten fly wheel so i can show the machine shop where to take out material.
also would like to get some pics of some port work that adds mid range to top end power

[dxcody]

my vote for any type of head work is to go to CT Racing.

Been porting 400ex heads since they came out, they know what works.

[cheater13]

I been told my 400ex would be a good rodeo fourwheeler when i was building it for drag racing. :p

Theres pictures of mine somewhere on here

[riggsracin]

Any one have pics of a shaved fly wheel? or any port work

[400exmxracer]

I can't find anything that even tells me about lightening fly wheels either!

[riggsracin]

i just need some pics to show where to remove the weight from, so i can show the machine shop.

[Chukkinsod]

Ok , I'm from MI and have no idea what the hell a rodeo bike is?? Is this a southern thing or am I just not up to speed on my lingo

[400exmxracer]

Where at in mi? And look it up on YouTube. It'll explain it all

[TacicalRedneck]

Not to hijack your thread or nothing, but where abouts do yall do this? I've seen it on the internet... looks fun to say the least..

[400man]

heres a couple vids from a few years ago when I had my 250r

http://www.youtube.com/watch?v=dz71y4rnkNQ

http://www.youtube.com/watch?v=IuMSpYJIB1s

[Chukkinsod]

so basically barrel Race or a good ole fashioned figure 8~ Looks fun.......are you timed like on a horse? >>>>>now add another person!

[riggsracin]

Got the following so far:
Sway Bar
Stage 2 hot cam
426 11.1 wisceo piston
Wisceo Crank and crank bearings
fmf Power bomb header with pro cirurt shorty
HD head studs
FCR Carb
Steering stabilizer
19" holeshot mxr6 in front and 18" rear
4" axle widing kit
, going to get 10oz shaved off flywheel
head decked and clean up the port work. any one have any pics of tips for porting the head?

[400exmxracer]

Sounds almost just like my set up

[riggsracin]

How does Urs run? What about compared to a stock 450r

[400exmxracer]

Im putting it together right now! I just rebuilt the bottom end last night. I'm excited to see how it does against them. How does your do? Compared to 450's?

[riggsracin]

im gonna try and put the bottom end together tonite, im still waiting on my studs and havent had my cyclinder bored or fly wheel shaved? did u have ur fly wheel shaved ifso up load pics

[400exmxracer]

No I haven't, did u get yours together tonight? If you did, did the crank gear not mesh perfectly(have a small dead spot) when you rotated it, meshing with the counter balance gear? I have the same crank and mines doing that. Itl wear in I'm sure

[riggsracin]

does it do that when cases are together?i had to rebuild my transmission. some one welded sporket to the shaft and striped shifter shaft to.

[400exmxracer]

It did it worse when I put the two haves together