fx4pitrone
08-19-2012, 09:09 PM
1988 Suzuki Quadracer LT250r 2-stroke complete part-out! Every part is top-notch or mint.... No garbage here. Most parts are either Powder coated (if they're metal) or polished (if aluminum)... all polished parts were done professionally by "Race Reflections" out of Tennessee... look them up....
MOTOR: $800
1988 Powervalved motor, painted black w/ polished clutch, stator, water pump, and PW cover
Brand new Hot Rods complete crank
Brand new OEM crank bearings and seals
Newly rebuilt water pump
Billet thrust washers w/ RM250 wrist pin bearing (reliability mod.)
Squish set
All new gaskets throughout
Sleeved and ported cylinder (not sure by who, no engraving)
Cases are mint w/ ZERO damage!
Complete drop in and run motor...
Cases were split and everything was cleaned and inspected and assembled by very reputable builder (Bartlett Racing (Carl, or "Iceracer"), look him up on QRHQ.com)
$200 Paul Turner MX race pipe w/ Fatboy 2 silencer and flange
$150 V-force 2 reed cage w/ new reeds and port-matched intake boot
$50 Stock mikuni carb (2 or 3 of them)
$100 Keihin PWK 39 carb
$90 Mikuni TMS 38 carb
$125 FMF pipe/silencer
CHASSIS:
$350 1988 MINT frame, gussetted for strength and durability, PC'd black
**PENDING**$175 LSR Steering Stem (chrome) w/ anti-vibe clamps, mint
$375 SLC Chromoly round-housing (Honda style) swinger, PC'd silver w/ clear
**SOLD**$160 SLC billet (brand new) complete bearing carrier, all bearings seals
$280 Stock A-arms and Tie-rods, PC'd silver w/ clear, w/ brand new ball joints and rod ends all-around, camber mod,
**PENDING**$285 Works rear shock w/ rezzie and linkage
$300 White plastics w/ DDrslapp custom OEM decals in black/gray/white
$80 Brand new Maier custom hood and cap (shiny black)
$75 AC Racing chassis skid w/ all mounts, new
$60 DG Baja chassis skid w/ all mounts
$80 ea. PRM Swingarm Skidplates (stock swinger skid, and SLC skid, both .250 thick,) both brand new
$75 PRM Chassis skid w/ mounts
**PENDING**$75 PRM rear baja grab bar (new) w/ fender brace mounts
$75 PRM baja front bumper (new)
$90 Blingstar Iron cross front bumper, brand new, black textured
**PENDING**$80 AC racing mudscreen front bumper, great shape
**SOLD**ELKA front stage 1 shocks (brand new, still w/ tag) XC/trail, 190 lb rider, stock arms... may keep these, not positive yet!!??
Many polished parts, all freshly done by Race Reflections in TN (NOT CHEAP!!)
$125 OEM axle, fresh zinc coated, looks better than new, w/ zinc'd sprocket hub and PC'd brake hub, straight, mint
$80 Polished RAD axle nuts
$90 New LSR billet rear hubs, PC'd black
$125 Front hubs, PC'd black w/ brand new bearings installed, EBC (brand new) front drilled rotors
Rebuilt front calipers (brand new OEM pistons/seals, glass beaded calipers, PC'd black brackets)
$75 OEM stem, mint
$125 OEM swinger w/ carrier and new bearings
$75 OEM carrier w/ brand new bearings installed
$40 OEM front shocks
$85 Brand new OEM Airbox w/ new Uni filter
$65 Pegs w/ extensions, mint, PC'd black
**SOLD**$40 SB Designs Rear fender supports, new
**SOLD**$50 SB Designs Case saver w/ cover and spacers/bolts
$75 Polished DG nerfs w/ blue nets and mounting bracket
$75 Graydon Pro-line nerfs w/ brand new black nets, newer
$75 Mint fuel tank w/ BRAND NEW OEM fuel petcock/screens
New cables
New OEM wire harness
New coil
$575 Complete stock 1989 motor, drop in and run... mint cases
I have soooo many other parts available... e-mail, call or text w/ needs.
Will TRADE for Quadzilla aftermarket parts or TRX250r parts ONLY... must be nice! No junk please!
All prices are or best offer.....
Thanks for looking!
(Eight-six-zero) 424-6574
MOTOR: $800
1988 Powervalved motor, painted black w/ polished clutch, stator, water pump, and PW cover
Brand new Hot Rods complete crank
Brand new OEM crank bearings and seals
Newly rebuilt water pump
Billet thrust washers w/ RM250 wrist pin bearing (reliability mod.)
Squish set
All new gaskets throughout
Sleeved and ported cylinder (not sure by who, no engraving)
Cases are mint w/ ZERO damage!
Complete drop in and run motor...
Cases were split and everything was cleaned and inspected and assembled by very reputable builder (Bartlett Racing (Carl, or "Iceracer"), look him up on QRHQ.com)
$200 Paul Turner MX race pipe w/ Fatboy 2 silencer and flange
$150 V-force 2 reed cage w/ new reeds and port-matched intake boot
$50 Stock mikuni carb (2 or 3 of them)
$100 Keihin PWK 39 carb
$90 Mikuni TMS 38 carb
$125 FMF pipe/silencer
CHASSIS:
$350 1988 MINT frame, gussetted for strength and durability, PC'd black
**PENDING**$175 LSR Steering Stem (chrome) w/ anti-vibe clamps, mint
$375 SLC Chromoly round-housing (Honda style) swinger, PC'd silver w/ clear
**SOLD**$160 SLC billet (brand new) complete bearing carrier, all bearings seals
$280 Stock A-arms and Tie-rods, PC'd silver w/ clear, w/ brand new ball joints and rod ends all-around, camber mod,
**PENDING**$285 Works rear shock w/ rezzie and linkage
$300 White plastics w/ DDrslapp custom OEM decals in black/gray/white
$80 Brand new Maier custom hood and cap (shiny black)
$75 AC Racing chassis skid w/ all mounts, new
$60 DG Baja chassis skid w/ all mounts
$80 ea. PRM Swingarm Skidplates (stock swinger skid, and SLC skid, both .250 thick,) both brand new
$75 PRM Chassis skid w/ mounts
**PENDING**$75 PRM rear baja grab bar (new) w/ fender brace mounts
$75 PRM baja front bumper (new)
$90 Blingstar Iron cross front bumper, brand new, black textured
**PENDING**$80 AC racing mudscreen front bumper, great shape
**SOLD**ELKA front stage 1 shocks (brand new, still w/ tag) XC/trail, 190 lb rider, stock arms... may keep these, not positive yet!!??
Many polished parts, all freshly done by Race Reflections in TN (NOT CHEAP!!)
$125 OEM axle, fresh zinc coated, looks better than new, w/ zinc'd sprocket hub and PC'd brake hub, straight, mint
$80 Polished RAD axle nuts
$90 New LSR billet rear hubs, PC'd black
$125 Front hubs, PC'd black w/ brand new bearings installed, EBC (brand new) front drilled rotors
Rebuilt front calipers (brand new OEM pistons/seals, glass beaded calipers, PC'd black brackets)
$75 OEM stem, mint
$125 OEM swinger w/ carrier and new bearings
$75 OEM carrier w/ brand new bearings installed
$40 OEM front shocks
$85 Brand new OEM Airbox w/ new Uni filter
$65 Pegs w/ extensions, mint, PC'd black
**SOLD**$40 SB Designs Rear fender supports, new
**SOLD**$50 SB Designs Case saver w/ cover and spacers/bolts
$75 Polished DG nerfs w/ blue nets and mounting bracket
$75 Graydon Pro-line nerfs w/ brand new black nets, newer
$75 Mint fuel tank w/ BRAND NEW OEM fuel petcock/screens
New cables
New OEM wire harness
New coil
$575 Complete stock 1989 motor, drop in and run... mint cases
I have soooo many other parts available... e-mail, call or text w/ needs.
Will TRADE for Quadzilla aftermarket parts or TRX250r parts ONLY... must be nice! No junk please!
All prices are or best offer.....
Thanks for looking!
(Eight-six-zero) 424-6574