2007+ 300EX Front and Rear Fenders

[Nrgy]

I have a set of 07+ black rear fenders, and 07+ black left & right front fenders for the 300ex. This will also fit earlier year 300ex, as I have these installed on my 1999. You will need the newer front fender support bracket however.

The condition of these are good, no cracks and minor scuffs/scratches. All mounting points are good as well. I am selling these because I want to try a different color scheme. I will try to get pictures up shortly.

I would like $400 for the set. I'll figure out shipping once I know your location (city/zip) and perhaps split the costs.

I also have the tank cover and hood, which are also black. I was planning to still use these, but if you want them I can include those for an additional $50.

[Threewits]

I just may be interested in these. If you have issues posting pics, could you just send them to me at 765-346-9610 ? Thanks BTW, for shipping I am at Indiana 46151.

[Nrgy]

Sorry I was a little slow on the pictures. I tried to take them in decent lighting that didn't hide the condition of these fenders. As you can see these have pretty typical wear and not abused. The worst part is on the edge of the rear fender as highlighted in the picture, and part of the left decal is cracked toward the front (not the plastic). Overall, it looks way better than the old plastics (IMO) and makes the quad look 10 years younger!

I also have an extra set of most of the brackets and screws including the rear seat hook that I'll include if you need them.

I checked shipping to 46151 and it would be right around $100 which I know is kinda steep. I could split the shipping and also throw in the tank cover and hood for $25, so $475 shipped for all.

https://dl.dropbox.com/u/45859785/300EX/300ex_01.jpg

https://dl.dropbox.com/u/45859785/300EX/300ex_02.jpg

https://dl.dropbox.com/u/45859785/300EX/300ex_03.jpg

https://dl.dropbox.com/u/45859785/300EX/300ex_04.jpg

[miniquaddad90]

Would you sell just the rears?

[Nrgy]

I would like to try and sell it as a set first, however if nothing happens in the next few days I'll let you know.

[Nrgy]

I'll sell the set for $400 shipped...fronts, rears, tank, and hood.

[Threewits]

Still have the plastic?

[Nrgy]

Yep still have the plastic as of now. It is currently up on eBay, but if you want it I can cancel the auction and still sell it for $400 shipped. Just let m know, thanks.

[Threewits]

I heard that you have to add a mount to the frame to use the late model plastic, is this the case?

[Nrgy]

The fronts and tank cover bolt up perfect. The rears also mount up perfect but I was confused how to mount the brackets near the heel gaurds. It does appear there are no bolt holes on the frame for the lower rear fender brackets.

I'm more concerned about the right side since this is where the exhaust is. I was going to just make a new bracket that will use the existing mount for the heel gaurd support as I'd rather not drill the frame.

I spent over an hour figuring out how those rear fender mount bolted up before I eventually realized the new frames must have a mount.

[799 dad]

do you still have these plastics if so what is your best price?