250r based mini?

[travis_ranger20]

Can someone tell me what I have here, I bought it and the guy told me it was a 86 250r, then another guy told me its a mini quad? please help and text me what it is-812-340-0908

[badway23]

Need a picture to help you out

[travis_ranger20]

Originally posted by badway23
Need a picture to help you out sorry it wouldn't let me post pics on the thread.

[travis_ranger20]

Originally posted by badway23
Need a picture to help you out

[badway23]

It is not a stock frame, it looks like a 250r based frame built for mini quad what size motor was in it? When I raced TT there was mini quads that looked similar to th 250r frame but had like 90 cc motors on them. Hope I helped you out

[travis_ranger20]

Originally posted by badway23
It is not a stock frame, it looks like a 250r based frame built for mini quad what size motor was in it? When I raced TT there was mini quads that looked similar to th 250r frame but had like 90 cc motors on them. Hope I helped you out I bought it just like this and do not know what engine to put on it, Im wanting to sell it but can't do that till i find out what it is.

[travis_ranger20]

Originally posted by travis_ranger20
I bought it just like this and do not know what engine to put on it, Im wanting to sell it but can't do that till i find out what it is. it is short but wider than the YFZ450

[travis_ranger20]

Originally posted by travis_ranger20
it is short but wider than the YFZ450

[badway23]

Those are better picks, that's a mini it probably had a 90cc or something similar. There is a guy in greenbrier ar that has built a lot of mini quads. His business name is DC motorsports his name is David carter, I'm sure he could answer your questions.

[travis_ranger20]

The guy i bought it off of told me it was a 86 250r, didn't realize i bought a mini!

[badway23]

The guy lied to you I have an 86 in the garage that I'm rebuilding if I can figure out how to post a picture on here I will. You will see the differences pretty easily

[etccb]

Cobra? Make a similar thread with pics in the mini hybrid section.
http://www.exriders.com/vbb/forumdisplay.php?s=&forumid=237

[Motofool250r]

its a custom frame gas tank, but i do see a resemblance of 250r in it

[89trx250r]

Looks like a supermini built for an 85cc 2 stroke dirtbike motor...Cr 80/85 in most cases. That was probably a pretty penny to have made. Post it in the mini section for sure and the guys there will either offer to buy it from you or know what it is or who built it.

[travis_ranger20]

Originally posted by 89trx250r
Looks like a supermini built for an 85cc 2 stroke dirtbike motor...Cr 80/85 in most cases. That was probably a pretty penny to have made. Post it in the mini section for sure and the guys there will either offer to buy it from you or know what it is or who built it. its listed there as well, it has Nacs hubs, works remote ressi front shocks, pep remote ressi rear shock, lonestar rear axel, lsr long travel a-arms, anti-vibe stem and much more.

[01shee]

I saw that on Craigslist. I wanted to call the guy and let him know that it wasn't a 250r.

[Honda 250r 001]

That thing is Sick!!! I would love to have that!

[travis_ranger20]

Originally posted by Honda 250r 001
That thing is Sick!!! I would love to have that! its for sale or trade!

[4wheelmx]

P.M. sent.

[travis_ranger20]

It has remote ressi works front shocks, LSR long travel front end-all chrome, LSR extended chrome swing arm, Nacs front hubs, Nacs rear disk brakes, antivibe sterring stem, Hanson foot brake, AC nerfs , AC front and rear grab bar, Billet sprocket hub, CDI box, Keihin carb, after market Nacs wheels with beadlocks. This quad is wider than a YFZ 450

[croat1]

Originally posted by travis_ranger20
its for sale or trade!


what are you asking for it or what are you looking to trade it for?
you can send me a pm or email me at:
joseph.ivanac@att.net

[travis_ranger20]

Ok, I've been told its a JP frame early to mid 90's and runs a cr 80-85 engine now gotta find out what plastics, then its off to ebay. Any ideas on Plastics?

[Honda5]

It's a Cobra and with the sticker on the swingarm I would bet it is set up for a CR85 You will need the Cobra plastics.

[travis_ranger20]

Originally posted by Honda5
It's a Cobra and with the sticker on the swingarm I would bet it is set up for a CR85 You will need the Cobra plastics. TY for your help, I thought I bought a 250r!

[dustinshuler]

I would almost bet anything its not a cobra!!! I agree that its an old jp 90 mod and if so it takes the old 86ish trx125 plastic!

[89trx250r]

I have to agree with Dustin...I don't think cobra makes narrow front frames and that has removable subframe and it almost looks like it has a mini cr500 link or some tricks look how verticle the back shock is mounted? It seems like whoever built this for there kid had no budget.

[travis_ranger20]

Ok, part it out or sell as whole on ebay?

[89trx250r]

Well you should consider selling it to a member here...Croat1 asked how much you wanted or what you wanted to trade and I saw another guy offer also...

[travis_ranger20]

Originally posted by 89trx250r
Well you should consider selling it to a member here...Croat1 asked how much you wanted or what you wanted to trade and I saw another guy offer also... I don't wanna sell till I know what it is for sure.

[travis_ranger20]

Here is another pic.

[travis_ranger20]

Another!

[etccb]

Originally posted by travis_ranger20
Ok, part it out or sell as whole on ebay?

Sell as stated on here or part out the 250r stuff. I think it may take too much to make it a mini racer again and those mini dads will go another route. Start by testing the waters as a whole and then part it but on this site first before ebay.

[travis_ranger20]

Another!

[bigmatt61]

They are closed today, but Call jimmy at T&T in Bardstown, Ky. tomorrow 502- 348-4847
Tell him I told you to call him and I think you have Derek Sheroan's old cr 85 mod quad and see if he can better help you determine what you have.

Matt Nichols

[travis_ranger20]

Originally posted by bigmatt61
They are closed today, but Call jimmy at T&T in Bardstown, Ky. tomorrow 502- 348-4847
Tell him I told you to call him and I think you have Derek Sheroan's old cr 85 mod quad and see if he can better help you determine what you have.

Matt Nichols Thanks for the help Matt. Im thinking your prob right cause one of the stickers on the shrowds has a KY company on it.

[hawaiiysr]

Does the CDI not have any numbers on it? Normally CDI's have the part numbers on them. If you can search the number it should tell you what engine was in there.

[travis_ranger20]

Originally posted by hawaiiysr
Does the CDI not have any numbers on it? Normally CDI's have the part numbers on them. If you can search the number it should tell you what engine was in there. TY very much!

[travis_ranger20]

Originally posted by hawaiiysr
Does the CDI not have any numbers on it? Normally CDI's have the part numbers on them. If you can search the number it should tell you what engine was in there. The CDI box has CF50 on it, a little research and it says its a factory 88-89 250r?

[bigmatt61]

Did you call jimmy?
You could also measure the size of that Carb to get an idea of what size motor was in there.
That motor area looks small for a 250 motor, just sayin.

[travis_ranger20]

Originally posted by bigmatt61
Did you call jimmy?
You could also measure the size of that Carb to get an idea of what size motor was in there.
That motor area looks small for a 250 motor, just sayin. Yes he said if its his old bike its an old JP frame with a cr 80 engine, sent him lots of pics and still waiting to hear back from him. He said its an exotic bike, has a cr 500 rear swing arm and lots of lonestar parts.

[89trx250r]

I knew it...Just look at that rear shock its way to vertical to not be a cr500 link...I knew what I saw when I first posted...Not to mention its a narrow frame but uses a piece of square tubing like a roll design instead of two narrow rails like a Laeger... Also like bigmatt posted that area is way to small for a 250 motor...Its definitely for an 80/85.

[Honda5]

Guess I was wrong on that one. But my Jp frames all have JP id tags on them. Oh whell what do you want for it?

[travis_ranger20]

Originally posted by Honda5
Guess I was wrong on that one. But my Jp frames all have JP id tags on them. Oh whell what do you want for it? Shoot me an offer,

[travis_ranger20]

Took the quad in today and it does take the 86-89 250r plastic with cr80-85 engine!

[buford]

I have an old dirt wheels magazine with two of these JP mini's featured. One ran a water cooled CR 80 motor and the other a air cooled CR 60.

I believe the plastic was off either a 200 or 300 ex on the one with the 80 cc motor in it. The fuel tank in your pics don't look like a 250r tank, looks more like a 4 stroke tank.

If you are really curious, why don't you call Lone Star and talk with them about it. JP racing changed it's name to Lone Star back in the 90's sometime.

[etccb]

It doesn't look like the 250r plastic will fit around that tank very good.

[travis_ranger20]

Originally posted by etccb
It doesn't look like the 250r plastic will fit around that tank very good. we put the plastics on it today and this quad is the same size in length as my brothers yfz 450 but wider.

[etccb]

Look at this 86-87 trx125 clark aftermarket tank.


http://www.ebay.com/itm/Gas-Tank-TRX-125-87-88-by-Clarke-Mfg-New-NATURAL-Stock-Gallons-QPS-/280846282060?pt=Motors_ATV_Parts_Accessories&hash=item4163be2d4c&vxp=mtr

[travis_ranger20]

Originally posted by etccb
Look at this 86-87 trx125 clark aftermarket tank.


http://www.ebay.com/itm/Gas-Tank-TRX-125-87-88-by-Clarke-Mfg-New-NATURAL-Stock-Gallons-QPS-/280846282060?pt=Motors_ATV_Parts_Accessories&hash=item4163be2d4c&vxp=mtr it is a Clark tank!

[etccb]

For a trx125!!!!
Did your 250r plastics that you put on there match the mounts? This may take all trx125 plastics as stated before.

[travis_ranger20]

Originally posted by etccb
For a trx125!!!!
Did your 250r plastics that you put on there match the mounts? This may take all trx125 plastics as stated before. not exactly but they said there was metal pieces missing?

[etccb]

Tuff deal. At this point I would not go telling people that they do as you are trying to sell it. Missleading information that may have someone very upset with you.

[travis_ranger20]

Originally posted by etccb
Tuff deal. At this point I would not go telling people that they do as you are trying to sell it. Missleading information that may have someone very upset with you. this guy has dealt with 250's for along time, im only stating as i was told. im not going to sell until I put the engine and plastics on it anyhow!

[travis_ranger20]

Originally posted by travis_ranger20
this guy has dealt with 250's for along time, im only stating as i was told. im not going to sell until I put the engine and plastics on it anyhow! here are more pics!

[travis_ranger20]

Originally posted by travis_ranger20
here are more pics!

[travis_ranger20]

Originally posted by travis_ranger20