Quick question

[250rsforlife]

So I redid the wiring an new Cdi box on my r finally an when I went to start it started an ran but when I looked down my kick start lever was all the back like wrong way so I turned it off an left it alone does anybody know what's wrong with it?

[250rice]

did the kicker not come back up. or it came up then went back towards the rear tire. either way something it broke you need to take the cover off and look let us know what you see

[250rsforlife]

It came back up then back toward the rear tire an stayed there

[250rice]

never seen that. i think there a stop inside may of broke off or the plat with 2 or 3 bolts that hold it in came loose and thats what the kicker stops on. if your lucky it came loose. it could be the return spring to but it will not come back up at all if it is broke so i dont think that is it. the only way to find out is to remove the side case

[250rsforlife]

No it's that plate the bolts broke so I gotta find a new one

[250rsforlife]

Well I tore it apart even more an idk how it happened but the place where the bolts go to hold that plate r the case broke an now a bolts inside the middle part of the engine so this is gonna b exspensive haha I might just sell it a it sits right now actually

[250rice]

so the bolts broke off in the case. that sucks did you try to use a easy out on them if you can get them out you will only need new bolts

[250rsforlife]

Yes the bolts r out now an I need to weld a little on te case to make it flat again to put the plate an bolts back in