Roll Ball joints

[rockingkfarms]

Looking for replacement ball joints for Roll Design a arms from the mid 90's. These are non heim, non lobo style. Does anything other than Roll fit these? If so, what manufacturer and part number? Also, if any member has these for sale, let me know. Thanks.

[Motofool250r]

I have the same problem, they are a different diameter then the newer stuff.

I tried where dan hung got his parts before no luck.

These are a Metric 16mm diameter, 1.5 thread pitch

i am about to send one into ASR to see if theres match he says hes sure they do but ive already got one wrong set of ball joints so far.

if your looking for just the cheapest option there are some ones on ebay listed for z400 and banshee for 60$ for all 4

[deathman53]

Moog sells them, they are tie-rod ends for small cars and light trucks. There is 2 diameters for the most part 14mm and 16mm.

[Langbolt]

If it's a M16x1.5 pitch it's the GEO Tracker - Part#ES3045RL

You can give these part #'s to any Auto supply store and they can order them in.

[Langbolt]

If not....you can cross reference what you need here:

http://www.moog-suspension-parts.com/Universal_Outer_Tie_Rod_Ends.asp

:devil:

[danhung11]

Originally posted by Langbolt
If it's a M16x1.5 pitch it's the GEO Tracker - Part#ES3045RL

You can give these part #'s to any Auto supply store and they can order them in.

I believe this is correct, I have heard this when I was trying to relocate the old Roll style ball joints. I believe they are the same for the uppers and lowers.

[rockingkfarms]

Thanks for all the help and information...

[Motofool250r]

Originally posted by danhung11
I believe this is correct, I have heard this when I was trying to relocate the old Roll style ball joints. I believe they are the same for the uppers and lowers.

uppers and lower are the same ball joint .

[wolvman]

yes they are the same