flooringit
07-04-2012, 10:00 PM
Went on a 5hour trip to buy a apex, kid blew it up, long story so now ive rebuilt the motor but ive notcied a few things that dont seem right,
Its suppose to be a 06 but,the sprocket isnt held on with a nut but with a washer the locks and 2 small bolts. I went to change tranny fluid was no drain plug in it,lol that made me start lookin, he gave me a box of parts and one was a shaft that holds on the clutch. so i put in a new drain bolt poured in fluid all leaked out. guy used his old gasket,
then the rear caliper locked up right before he blew it up, so I bought one from the parts forum, got his and it was red and the mou ting bolts were further apart, and the piston side brake pad was bigger then mine, I have a gold caliper. all worked out I just changed the moutning brakcet, but the rotor was cupped, which I noticed when the caliper frooze so i bought one of those also, I out new one on and it was wanting to cup, looks like he changed the caliper at some point didnt get the spacers right i used a bigger set and all is well, or seems to be,lol
Did i buy a frankenstein bike that guy has bought parts from other quads and put on here?
seems like the sprocket shaft isnt right, he also siliconed the sprocket on the shaft, the quad looked new when i got it but apparently its had a motor issue or 3.any help would be nice , i need a new spocket on front, got to figure out what its off, it seems to be same as my old 2009 ds 90
Its suppose to be a 06 but,the sprocket isnt held on with a nut but with a washer the locks and 2 small bolts. I went to change tranny fluid was no drain plug in it,lol that made me start lookin, he gave me a box of parts and one was a shaft that holds on the clutch. so i put in a new drain bolt poured in fluid all leaked out. guy used his old gasket,
then the rear caliper locked up right before he blew it up, so I bought one from the parts forum, got his and it was red and the mou ting bolts were further apart, and the piston side brake pad was bigger then mine, I have a gold caliper. all worked out I just changed the moutning brakcet, but the rotor was cupped, which I noticed when the caliper frooze so i bought one of those also, I out new one on and it was wanting to cup, looks like he changed the caliper at some point didnt get the spacers right i used a bigger set and all is well, or seems to be,lol
Did i buy a frankenstein bike that guy has bought parts from other quads and put on here?
seems like the sprocket shaft isnt right, he also siliconed the sprocket on the shaft, the quad looked new when i got it but apparently its had a motor issue or 3.any help would be nice , i need a new spocket on front, got to figure out what its off, it seems to be same as my old 2009 ds 90