PDA

View Full Version : Jetting i think



Chanman420q
03-07-2003, 01:18 PM
Ok my quad wasnt idleing unless it was at 10% choke ( or start ) so i put a 40 pilot jet into it, and now it wont idle or start and any choke possition... the only way it will start is if im giving it gas. Please help me

Chanman420q
03-07-2003, 01:19 PM
also i did clean it and it has a stock main jet into it now, the weather is about 20-40 degrees and im not much above sea level

trxex
03-07-2003, 01:49 PM
did you try adjusting your idle screw or piolt screw?. also how does in run at 1/4,1/2,3/4 ,w.o.t

Chanman420q
03-07-2003, 02:00 PM
i havent tried driving it yet... partly because theres no tires on it right now, also how should i adjust the air screw/ idle screw, the air screw is the screw in front of the carb... right? wheres the idle screw located maybe thats my problem

JOEX
03-07-2003, 08:13 PM
The idle screw is on the left side of the carb, towards the front.(the big one) I don't remember which way to turn it though, I wanna say clockwise to increase.

The air screw is on the bottom of the carb, also toward the front. It's a pain to turn.


Joe