PDA

View Full Version : starting issues NEED HELP



quadracrdad
06-23-2012, 12:55 PM
OK went to track started fine, after I shut off would not restart, had to bump start. If I jump across starter relay with screw driver it will start. Not getting power to relay to give power to starter. Checked starter buttton it is fine. Need help.

sm00th026
06-24-2012, 06:33 AM
Originally posted by quadracrdad
OK went to track started fine, after I shut off would not restart, had to bump start. If I jump across starter relay with screw driver it will start. Not getting power to relay to give power to starter. Checked starter buttton it is fine. Need help.
Fuse?

Y2daT420
07-25-2012, 04:35 PM
could be the fuse as mentioned
.
it could be the neutral safety switch.
.
if you pull the clutch in will it crank?
.
check the electric connections where the wire harness plugs together on the left side of the quad.