Bwr part out make offers on parts.

[beerock]

my bike has easily over 20k in it so if you understand the value beerock69@gmail.com

Its going on ebay soon, so it will parted out forever. unless someone gives me an offer for the bike in the 8k range

for $9k you get a spare 265 motor and all my extra parts. Oem gusseted 88 frame, oem spindles, hubs, swinwgarm, radiator, shrouds, plastics, seat, tires etc tons of pretty much a complete 250r less the axle, pipe, rear hubs steering stem handle bars and clamp.

I dont care what anyone thinks of the prices for the bike together, I totaled up the parts and even at low prices i have around 8-9k in parts to sell from this part out without including the spare parts



http://i35.photobucket.com/albums/d194/beerock69/me%20pics/atv/5.jpg

http://i35.photobucket.com/albums/d194/beerock69/me%20pics/atv/closeupcover.jpg

http://i35.photobucket.com/albums/d194/beerock69/me%20pics/atv/DSCF0083.jpg

http://i35.photobucket.com/albums/d194/beerock69/me%20pics/atv/DSCF0069.jpg

http://i35.photobucket.com/albums/d194/beerock69/me%20pics/atv/DSCF0020.jpg

you can see the headstay with stabiizer in this pic

http://i35.photobucket.com/albums/d194/beerock69/me%20pics/atv/P1010043.jpg


bwr bike

laeger 250r geom frame, fliptop subframe chrome and AC pro peg laeger nerfs 1300 SOLD

laeger -3/4" 88 swingarm 250r link comes with Tm design works swingarm slider black-new, Tm design works chain guide $350

Laeger protrax +3 front with stem with upper mount for steering stabilizer which mounts to headstay 1100 SOLD

Laeger chromoly headstay with steering stabilizer mount and stabilizer shock which mounts to steering stem 250

Axis 19" long travel shocks valved for pro rider, 165 lbs 700

2 Hermann resivior clamps 100

Axis 250r link rear shock santo derisis pro shock needs to be rebuilt 550

dominator +4 race axle 350

Lsr double roller bearing carrier 250

Lsr antifade hub 175

Ac Stadium bumper ?

Ac wide grab bar ?



Nacs steering stem clamp 80

Hardkor cannondale tapered bearing front hubs 300, with Gafler front disc wave rotors- 450

Gafler rear disc rotor 80

Gafler front kevlar brake lines 100

Gafler rear kevlar brake lines 50

Oem ront brake master cylinder 50

Oem honda front brake calipers 200

Oem rear brake master cylinder 100

Oem honda rear brake caliper 100

Oem front red honda fenders with BWR graphics kit 500 I may put these on ebay

Oem rear red honda fenders with BWR race number plates 500 I may put these on ebay

Feather lite custom silver hood with carbon kevlar flames 100

Feather lite custom silver rad shrouds with custom carbon kevlar flames 100

9x9 hiper carbon fiber rims 400

10x5 hiper carbon fiber rims 400

razor 21x7-10 front tires 80

razor 20x11x9 rear tires 80

Ricky Stator 200watt 150

Ricky Stator Rectifier 50

Ricky Stator Lightened Flywheel 100

Ricky Stator Billet handle bar clamp with Lights 200watt 300

Renthal Fat bars 80

Esr billit front motor mounts 80

Esr billit shifter 80

Hinson billit rear brake pedal 110

Curtis sparks TT pipe 200

Curtis sparks silencer 100

Afco oversized radiator with fittings 350

BWR engine: 2500

ct cyl 330

Keihn 39mm

BWR quick change clutch cover

Hinson basket

88 crank - 80 hours on it

cr250 boysen rad valve

10mm reed cage spacer plate

custom R case saver with shifter shaft protection

[Zakradu398]

CAnt believe your selling it man. That a nice R

[Deuce426]

PM Sent

[bananas]

Sorry to see you sell it... sucks not riding something...

[beerock]

I just put prices for everything.

[89trx250r]

What linkage is this frame sir?

[beerock]

It says 250r link and 250r geom

[beerock]

frame and subframe go together along with the ac pro pegs

[dustinshuler]

Pm sent

[rayman375]

I want those shock reservoir clamps. Send me PayPal info please.

[C-LEIGH RACING]

Just so any of you will know where Beerock stands.
That carbon fiber hood, was custom made for beerock by FeatherCarbon out of VA & is the only one like it ever made, custom for him.
Neil

[beerock]

thanks neil, yea the shrouds too and of course the quick change clutch cover


im writing down the phone numbers and people that want certain parts right now.

everyone will be getting a call during the week.

the bike is still together but It wont take me long to take it apart.

[RideRedPA]

pm sent

[sameltoe]

How much for the case saver?

[beerock]

case saver goes with bwr motor

[redred55]

Pm sent

[beerock]

someone actually asked me if they can switch the quick change with a hinson cover which can be done....however that is blasphemous.... ;p

[atv fan 28]

If you say so!! What is blasphemous is the ESR mounts and shifter prices..

[beerock]

well if they are too high thats great thanks for saying something I figured they went for more then that... so thats not a big deal however. the shfiter and the mounts are polished and pcoated with a red clear flake.. so whatever the price is for those parts take 20 off

[redred55]

Pm sent

[89trx250r]

I sent you a pm sir.

[beerock]

Originally posted by 89trx250r
I sent you a pm sir.

sent you one back

as welll as all the other pm's

[redred55]

Originally posted by beerock
sent you one back

as welll as all the other pm's

Never got a return pm-Id like to buy the hinson brake pedal

[beerock]

Originally posted by redred55
Never got a return pm-Id like to buy the hinson brake pedal sorry there was a guy in front of you for that

[rayman375]

Sent you a pm as well

[beerock]

Laeger frame, subframe and pro pegs are pending

Laeger Pro trax +3 front end is pending


clamps, axle and airbox are pending

[beerock]

Pro trax SOLD

[HondaRacing83]

why would someone pay $80 for fatbars, thats like what they are new lol

[beerock]

they have oury grips and the bars still look new

[beerock]

frame and protrax sold.. Im going to have pics of all separate parts soon...

I may send the shocks to axis to get them refreshed and have them sent to whoever buys them straight form axis.. if anyone is interested for them let me know. If I do this theres is a chance they can be reshsfted for a roll front end and revalved for your weight too... right now the fronts are for a pro rider and the rear is for a pro

[beerock]

heres a link to all the parts still for sale...

the quickchange cover, nacs clamp and hinson pedal are pending

http://s35.photobucket.com/albums/d194/beerock69/me%20pics/bwr%20parts/?start=all

[beerock]

bump

[sameltoe]

Did the nacs clamp sell?

[beerock]

its pending with the other parts on that list. im waiting to hear back from him...

your in the netherlands right? shipping is probably high. if you want it let me know and ill figure out shipping

[sameltoe]

Lol, no I'm in Iowa lol just thought that was funny...
Let me no beerock, thanks!

[beerock]

heres the first post reposted

my bike has easily over 20k in it so if you understand the value beerock69@gmail.com

Its going on ebay soon, so it will parted out forever. unless someone gives me an offer for the bike in the 8k range

for $9k you get a spare 265 motor and all my extra parts. Oem gusseted 88 frame, oem spindles, hubs, swinwgarm, radiator, shrouds, plastics, seat, tires etc tons of pretty much a complete 250r less the axle, pipe, rear hubs steering stem handle bars and clamp.

I dont care what anyone thinks of the prices for the bike together, I totaled up the parts and even at low prices i have around 8-9k in parts to sell from this part out without including the spare parts



http://i35.photobucket.com/albums/d194/beerock69/me%20pics/atv/5.jpg

http://i35.photobucket.com/albums/d194/beerock69/me%20pics/atv/closeupcover.jpg

http://i35.photobucket.com/albums/d194/beerock69/me%20pics/atv/DSCF0083.jpg

http://i35.photobucket.com/albums/d194/beerock69/me%20pics/atv/DSCF0069.jpg

http://i35.photobucket.com/albums/d194/beerock69/me%20pics/atv/DSCF0020.jpg

you can see the headstay with stabiizer in this pic

http://i35.photobucket.com/albums/d194/beerock69/me%20pics/atv/P1010043.jpg


bwr bike

laeger 250r geom frame, fliptop subframe chrome and AC pro peg laeger nerfs 1300 SOLD

laeger -3/4" 88 swingarm 250r link comes with Tm design works swingarm slider black-new, Tm design works chain guide $350

Laeger protrax +3 front with stem with upper mount for steering stabilizer which mounts to headstay 1100 SOLD

Laeger chromoly headstay with steering stabilizer mount and stabilizer shock which mounts to steering stem 250

Axis 19" long travel shocks valved for pro rider, 165 lbs 700

2 Hermann resivior clamps 100

Axis 250r link rear shock santo derisis pro shock needs to be rebuilt 550

dominator +4 race axle 350

Lsr double roller bearing carrier 250

Lsr antifade hub 175

Ac Stadium bumper ?

Ac wide grab bar ?



Nacs steering stem clamp 80

Hardkor cannondale tapered bearing front hubs 300, with Gafler front disc wave rotors- 450

Gafler rear disc rotor 80

Gafler front kevlar brake lines 100

Gafler rear kevlar brake lines 50

Oem ront brake master cylinder 50

Oem honda front brake calipers 200

Oem rear brake master cylinder 100

Oem honda rear brake caliper 100

Oem front red honda fenders with BWR graphics kit 500 I may put these on ebay

Oem rear red honda fenders with BWR race number plates 500 I may put these on ebay

Feather lite custom silver hood with carbon kevlar flames 100

Feather lite custom silver rad shrouds with custom carbon kevlar flames 100

9x9 hiper carbon fiber rims 400

10x5 hiper carbon fiber rims 400

razor 21x7-10 front tires 80

razor 20x11x9 rear tires 80

Ricky Stator 200watt 150

Ricky Stator Rectifier 50

Ricky Stator Lightened Flywheel 100

Ricky Stator Billet handle bar clamp with Lights 200watt 300

Renthal Fat bars 80

Esr billit front motor mounts 80

Esr billit shifter 80

Hinson billit rear brake pedal 110

Curtis sparks TT pipe 200

Curtis sparks silencer 100

Afco oversized radiator with fittings 350

BWR engine: 2500

ct cyl 330

Keihn 39mm

BWR quick change clutch cover

Hinson basket

88 crank - 80 hours on it

cr250 boysen rad valve

10mm reed cage spacer plate

custom R case saver with shifter shaft protection

[jjohns5]

1k for used Axis fronts? Are these Ti springs?

[beerock]

Originally posted by jjohns5
1k for used Axis fronts? Are these Ti springs?

actually the front shocks are 700 not ti

rear shock 550


selling the hipers for 575 shipped have new front rings and rear rings in red with 12 point stainless bolts for front and rear

hardkor hubs and gafler rotors 375

2 antifade hubs 100 ea

bottom end with hybrid transmission 5 w 265 b+b ported cylinder no piston 550

quick change clutch cover with honda quick change cover 350

afco radiator dual pass radiator with fittings 250

bwr 330 motor with broed cases and keihn pwk 39mm car and complete ignition 1500 turn key

[beerock]

Originally posted by sameltoe
Lol, no I'm in Iowa lol just thought that was funny...
Let me no beerock, thanks!

call me i pm'd you

[tharrison365]

what year is that rear shock for? and is it standard length eye to eye?

[beerock]

Originally posted by tharrison365
what year is that rear shock for? and is it standard length eye to eye?

Its for 88-89 rear, its santo derisis pro shock reb and comp adj and its a 250r link shock

[beerock]

here are details on the bwr 330 motor..

I built this motor and its a pro cross cylnder with changeable dome, it has no port work done to it just cleaned up ports by me and this motor has beat a curtis sparks 350 PV heavily ported same gearing as well when we raced.. has a Keihn 39mm pwk carb, ricky stator 200watt stator, ricky stator lightened flywheel, ricky stator rectifier, Hinson billit clutch basket, 89 clutch rod update, oem honda exhaust flange, cr250 boysen rad valve,10mm reed valve spacer, sch R case saver that goes around the shift shaft, oem 89 cdi box, 89 coil and oem handlebar switch(off/on/off, lights on, Hi/lo), the case halves are powder coated super mirror black, and the cdi cover is powder coated super mirror black with a clear red flake pcoat on top. I am including the clutch and throttle cable.

This motor is kick it over ready,all you have to do is bolt it in and mount the handlebar harness, connect your pipe, connect the coil to the spark plug, connect the throttle to the cable. connect the clutch cable and kick it over...

this motor has been run with amsoil dominator @ 50:1 on vp c12 race gas its entire life and it is not high comp you can run 93 in it.. i use vp for the lead for longer engine life and more mpg. it has 40 hours on it and runs flawlessly

I have two offers at 1500 right now and I had posted these prices last night without thinking about all the money in the ricky stator ignition system, billit basket, reed valve and carb

im seriously considering ebaying this motor but just dont want to deal with ebays bs anymore. I may get top dollar that way though so if you have offers over 1500 for this motor please post publicly.... ill do an auction right through the posts..

http://i35.photobucket.com/albums/d194/beerock69/me%20pics/bwr%20parts/IMG_3688.jpg

http://i35.photobucket.com/albums/d194/beerock69/me%20pics/bwr%20parts/IMG_3690.jpg

http://i35.photobucket.com/albums/d194/beerock69/me%20pics/bwr%20parts/IMG_3689.jpg




here is a link to all the parts

http://s35.photobucket.com/albums/d194/beerock69/me%20pics/bwr%20parts/?start=all

[tharrison365]

is the shock standard length? is that an over sized tank?

[beerock]

Originally posted by tharrison365
is the shock standard length? is that an over sized tank?

yes standard length for 250r link. yes its a clark 4 gallon tank

[tharrison365]

would you do 350 for rear shock. being 17 makes me short on cash especially for rebuild and getting started racing while supporting self.

[beerock]

just pmd you

[beerock]

guys if any of the prices are higher then new please let me know I put prices out there that I thought was fair for the piece... I was informed the nacs clamp is 39.95 new and i had it for 80 because i didnt know... so Do not htink im trying to rip anyone off I estimated all the prices... so please let me know.

[beerock]

still have plenty of parts for sale

[summit77]

send me pics of ; Hinson billit rear brake pedal , Curtis sparks TT pipe

chuck2010.-@hotmail.com

[protrax]

Payment sent for the red Nacs stem clamp
Thanks

[Honda 250r 001]

Originally posted by beerock
guys if any of the prices are higher then new please let me know I put prices out there that I thought was fair for the piece... I was informed the nacs clamp is 39.95 new and i had it for 80 because i didnt know... so Do not htink im trying to rip anyone off I estimated all the prices... so please let me know.

Who found an aftermarket steering stem clamp for 39.95?? Share the info man! Im lookin for one.
Thanks
Will

[beerock]

what prioce have you seen them going for? on nacs website they have them for 39.95

[bhatch21]

Are you selling the shifter and kicker off the motor pictured in the quad? Is it a chrome kicker and billet shifter?

[beerock]

kicker snapped recently, shifter is billit

[havinnoj]

PM'd - give me some info on front and rear axis shocks

[beerock]

here are pics of everything

http://s35.photobucket.com/albums/d194/beerock69/me%20pics/bwr%20parts/?start=all